4,199
edits
Changes
From IGEP - ISEE Wiki
m
→Create IGEP Firmware bootable SD-card
In this tutorial we are going to use the following peripherals:
* IGEP COM AQUILA with its an uSD card
* IGEP AQUILA EXPANSION with its power supply
* FTDI cable
= Getting started =
== Create IGEP Firmware bootable SD-card ==
IGEP COM AQUILA internal memory is not flashed by default, you will need a bootable SD-card to bootup your board.
If you don't have a bootable SD-card, download [https://www.isee.biz/support/downloads/item/igep-firmware-yocto-1-4-2-0-am335x the IGEP Firmare Yocto for AM335x] and follow the README file.
== Connect IGEP AQUILA Expansion with IGEP COM AQUILA Board ==
== Network ==
You may now plug the Ethernet cable into the 10/100 Ethernet jack of the board to get network access. The default firmware configures the Ethernet device with static IP address (192.168.5.1) and dynamic IP address (via DHCP).
== Keyboard/Mouse ==
