4,199
edits
Changes
From IGEP - ISEE Wiki
m
{{Message/Work in progress}}
PuTTY is a multiplatform SSH Open the serial on your PC using your preferred serial communications program (minicom) and telnet client. You can download it fromconfigure the port as follows: [http://www.putty.org putty * 115200* 8N1* no flow control (either software or hardware) Open the serial port and the debug shell prompt should appear.org]
*Open PuTTy.*Choose Serial line. If you are running PuTTy A detailed guide on Windows, the USB Serial converter line will be like (COM1 or COM2 or COM3, etc.). If you are running PuTTy on Ubuntu, the USB Serial converter line will how to connect via serial debug port can be like (/dev/ttyUSB0 or /dev/ttyUSB1 or /dev/ttyUSB3, etc.).*Configure Speed found by following this link: [[Using serial debug port to 115200*Select Serial Connection type*Press on Open button communicate]]
→Create IGEP Firmware bootable SD-card
{{Table/IGEP Technology Devices
|Tech_Family={{#lst:Template:Links|IGEP_AQUILA_EXPANSION_Tech_Family}}
In this tutorial we are going to use the following peripherals:
* IGEP COM AQUILA with its an uSD card
* IGEP AQUILA EXPANSION with its power supply
* FTDI cable
* Monitor compatible with HDMIwith audio.
* HDMI cable
* Powered USB HUB 2.0
= Getting started =
== Create IGEP Firmware bootable SD-card ==
IGEP COM AQUILA internal memory is not flashed by default, you will need a bootable SD-card to bootup your board.
If you don't have a bootable SD-card, download [https://www.isee.biz/support/downloads/item/igep-firmware-yocto-1-4-2-0-am335x the IGEP Firmare Yocto for AM335x] and follow the README file.
== Connect IGEP AQUILA Expansion with IGEP COM AQUILA Board ==
== Network ==
You may now plug the Ethernet cable into the 10/100 Ethernet jack of the board to get network access. The default firmware configures the Ethernet device with static IP address (192.168.5.1) and dynamic IP address (via DHCP).
== Keyboard/Mouse ==
=== Setting up connection ===
You will successfully started the console.
