4,199
edits
Changes
From IGEP - ISEE Wiki
m
no edit summary
== Monitor ==
The board will connect to your HDMI monitor. You can use a HDMI cable to connect the board to the monitor. Your monitor should be able to support 720p1024 x 768 @ 60 Hz, which is the default resolution used by the firmware.
== Network ==
You may now plug the Ethernet cable into the 10/100 Ethernet RJ-45 jack of the board to get network access. The default firmware configures the Ethernet device with DHCP protocolstatic ip address (192.168.5.1)
== Keyboard/Mouse ==
== Booting ==
IGEP AQUILA Expansion should unmount J101 jumper to boot from microSD card. Your monitor should be able to support 1024 x 768 @ 60 Hz, which is the default resolution used by the firmware.
{| cellspacing="1" cellpadding="1" width="200" border="1" align="center"
