Difference between revisions of "Getting started with IGEP AQUILA EXPANSION"

From IGEP - ISEE Wiki

Jump to: navigation, search
m (Keyboard/Mouse)
m (Getting started)
Line 49: Line 49:
  
 
The board will connect to your HDMI monitor. You can use a HDMI cable to connect the board to the monitor. Your monitor should be able to support 720p, which is the default resolution used by the firmware.
 
The board will connect to your HDMI monitor. You can use a HDMI cable to connect the board to the monitor. Your monitor should be able to support 720p, which is the default resolution used by the firmware.
 
{| cellspacing="1" cellpadding="1" width="200" border="1" align="center"
 
|-
 
| [[Image:Igep0033 login screen.JPG|600px]]
 
|}
 
  
 
== Network ==
 
== Network ==
Line 65: Line 60:
 
== Booting ==
 
== Booting ==
 
IGEP AQUILA Expansion should unmount J101 jumper to boot from microSD card.
 
IGEP AQUILA Expansion should unmount J101 jumper to boot from microSD card.
 +
 +
{| cellspacing="1" cellpadding="1" width="200" border="1" align="center"
 +
|-
 +
| [[Image:Igep0033 login screen.JPG|600px]]
 +
|}
  
 
== Remote connection via Serial interface ==
 
== Remote connection via Serial interface ==

Revision as of 12:46, 21 November 2013

Igep community logo.png This is a work in progress article. Help other developers like you in the IGEP Community by improving it!


Overview

This is the 1/3 chapter of the Getting Started with IGEP AQUILA EXPANSION Tutorial Guide. In this first chapter, we will learn :

  • Connect some peripherals, including monitor and USBs.
  • Boot the board and touring the default firmware.
  • Connect remotely to the board via Serial interface.

Upon completion, you will be ready to continue with chapter 2/3 that explains more advanced tasks.

Requirements

In this tutorial we are going to use the following peripherals:

  • IGEP COM AQUILA with its uSD card
  • IGEP AQUILA EXPANSION with its power supply
  • Monitor compatible with HDMI
  • HDMI cable
  • Powered USB HUB 2.0
  • USB keyboard and a mouse
  • Network cable
  • PC

Getting started

Connect IGEP AQUILA Expansion with IGEP COM AQUILA Board

The IGEP AQUILA Expansion connects to the IGEP COM AQUILA Board through K1 and J800 connectors.

BASE0033RA KIT.png

Monitor

The board will connect to your HDMI monitor. You can use a HDMI cable to connect the board to the monitor. Your monitor should be able to support 720p, which is the default resolution used by the firmware.

Network

You may now plug the Ethernet cable into the 10/100 Ethernet RJ-45 of the board to get network access. The default firmware configures the Ethernet device with DHCP protocol.

Keyboard/Mouse

Connect an USB hub to the USB Host and plug your keyboard and mouse into the hub.

Booting

IGEP AQUILA Expansion should unmount J101 jumper to boot from microSD card.

Igep0033 login screen.JPG

Remote connection via Serial interface

Overview

Serial header (J803) lets you debug system with an USB to 3V3 TTL level serial like TTL-232R-3V3 converter from FTDI or compatible reference. The TTL-232R-3V3 converter has 6 pins and IGEP AQUILA EXPANSION add a 7th way (3v3 power). The next image shows how to connect it:

Block diagram from IGEP0033


Setting up connection

PuTTY is a multiplatform SSH and telnet client. You can download it from: putty.org

  • Open PuTTy.
  • Choose Serial line. If you are running PuTTy on Windows, the USB Serial converter line will be like (COM1 or COM2 or COM3, etc.). If you are running PuTTy on Ubuntu, the USB Serial converter line will be like (/dev/ttyUSB0 or /dev/ttyUSB1 or /dev/ttyUSB3, etc.).
  • Configure Speed to 115200
  • Select Serial Connection type
  • Press on Open button

You will successfully started the console.



You have successfully completed this chapter of the guide.


Igep forum.png If you have any question, don't ask to ask at the IGEP Community Forum or the IGEP Community Chat Irc.png