0
edits
Changes
From IGEP - ISEE Wiki
no edit summary
= <span class="mw-headline">Overview </span> =
Important - Please '''read these documents before continuing''' with this article:
*Official [http://igepwww.esiseebcn.com/index.php?option=com_content&view=article&id=99&Itemid=129&dir=%2Fvar%2Fwww%2Fvhosts%2Figep.es%2Fhttpdocs%2Fdownloads%2F01-ISEE_Products%2FIGEPv2_EXPANSION%2FHW_User_Manuals&download_file=%2Fvar%2Fwww%2Fvhosts%2Figep.es%2Fhttpdocs%2Fdownloads%2F01-ISEE_Products%2FIGEPv2_EXPANSION%2FHW_User_Manuals%2FMAN-PR-IGEP.0022-001.01.HW_USER_MANUAL.pdf IGEP0022 Hardware Reference Manual] from ISEE *Official [http://igepwww.iseebcn.escom/index.php?option=com_content&view=article&id=99&Itemid=129&dir=%2Fvar%2Fwww%2Fvhosts%2Figep.es%2Fhttpdocs%2Fdownloads%2F01-ISEE_Products%2FIGEPv2%2FHW_User_Manuals&download_file=%2Fvar%2Fwww%2Fvhosts%2Figep.es%2Fhttpdocs%2Fdownloads%2F01-ISEE_Products%2FIGEPv2%2FHW_User_Manuals%2FMAN-PR-IGEP.0020-001.23.HW_RC.pdf IGEP0020 Hardware Reference Manual] from ISEE
<br>
<br>
= <span class="mw-headline">Mounting IGEP0022 </span> =
The IGEP0022 expansion board connects to IGEP0020 via 5 connectors of 10, 22, 28 and 30 pins located on both boards. First align the biggest 28 pin-connector gently press it until the other connectors insert into their corresponding connectors from the other board.<br>
== VGA monitor ==
Connect a VGA monitor to the IGEP0022 VGA connector.<br>
== CAN bus ==
Connect any CAN bus device or network to the CAN bus connector of the IGEP0022.<br>
== SIM card reader ==
A SIM card reader is provided with IGEP0022. You may connect a SIM card to use the GSM/GPRS modem to make phone calls or to send SMS or to write and read data from it, etc.
== GSM/GPRS antenna ==
[[Image:IGEP0022 Modem with antenna.png|frame|center|551x345px]]
== TFT and Touchscreen<br> ==
IGEP0022 integrates a LCD backlight driver (Texas instruments TPS61081) and touch screen controller (Texas instruments TSC2046), 4-wire touch screen controller which supports a low-voltage I/O interface which can be directly connected to a SEIKO 7” LCD or to a POWERTIP 4.3” LCD.<br>
