0
edits
Changes
From IGEP - ISEE Wiki
→Is it possible to config the wireless LAN and bluetooth so they are completely off, and not consuming any power at all?
Yes, you could use powerdown and reset pins:
On newer [[Frequently Asked Questions and Their Answers#Which_revision_is_my_IGEPv2_board.3F|IGEP0020-RB1/IGEPv2-RBRCx]], wifi powerdown and reset lines are available on GPIO_94 GPIO_138 and GPIO_95 GPIO_139 pins, and it is not available reset bluetooth line (only TPD06 hardware test point)is available on GPIO_137.
On old [[Frequently Asked Questions and Their Answers#Which_revision_is_my_IGEPv2_board.3F|IGEP0020-RC1RB1/IGEPv2-RC]] or [[Frequently Asked Questions and Their Answers#Which_revision_is_my_IGEPv2_board.3F|IGEP0020-RC4RB]], wifi powerdown and reset lines are available on GPIO_138 GPIO_94 and GPIO_139 GPIO_95 pins, and it is not available reset bluetooth line is available on GPIO_137(only TPD06 hardware test point).
On old [[Frequently Asked Questions and Their Answers#Which_revision_is_my_IGEPv2_board.3F|IGEP0020-RC3]], reset bluetooth line is available on GPIO_137, but they use GPIO_94 and GPIO_95 pins for wireless pins like IGEP0020-RB1 board configuration ([[Frequently Asked Questions and Their Answers#Is_it_possible_to_config_the_wireless_LAN_and_bluetooth_so_they_are_completely_off.2C_and_not_consuming_any_power_at_all.3F|IGEPv2-RCx PCB compatible IGEPv2-RB1]]) board software compatibility.
<br>
Linux kernel autodetects B or C assembly configuration. Check you [[Frequently Asked Questions and Their Answers#Which_revision_is_my_IGEPv2_board.3F|IGEPv2 board revision]] and [[Frequently Asked Questions and Their Answers#Is_it_possible_to_config_the_wireless_LAN_and_bluetooth_so_they_are_completely_off.2C_and_not_consuming_any_power_at_all.3F|IGEPv2-RCx PCB compatible IGEPv2-RB1]].<br>
<br>
=== Can I attach an LCD with LDVS interface? ===