=== JC30 connector ===
The next table show Jc30 connector information:
'''(table)'''<br>
JC30 is used to connect a camera for capture video or image. Omap have the processing capability to connect RAW image-sensor modules via this connector.
There are some peripherals than can be connected to JC30 like like CAM, SSI and CSI, but is not used in this how-to. GPIO are the default peripheral.<br> Before use this The next table show Jc30 connector be careful at these pointsinformation: - Pad 1 can be used to power down wifi module if RD41 is short circuit, replace RD42 for this porpouse.<br>- Pad 2 can be used to reset wifi module if RD43 is short circuit, replace RD44 for this porpouse.<br>- Pad 21 can be connected to I2C2_SCL, that wire is shared with J990 connector and I2C2_SCL peripheral. Placing/replacing RC13 for tis porpouse.<br>- Pad 22 can be connected to I2C2_SDA, that wire is shared with J990 connector and I2C2_SDA peripheral. Placing/replacing RC14 for tis porpouse. '''(table)'''
=== JA42 connector ===