Personal tools

Log in

Changes

From IGEP - ISEE Wiki

Jump to: navigation, search

Category:IGEP0030

31,664 bytes added, 13:54, 28 June 2013
Added expansion connectors section
{{#lst:Template:Navigation|IGEP Technology Devices}}<section begin=IGEP0030 revisions />=== IGEP0030 revisions ===
{{IGEP Technology Devices|cellpadding=4|-|'''Revision'''|'''Name'''|'''Comments'''|device- valign="top"|IGEP0030-RE6|productname=[[IGEP COM MODULE]]|image=Igep0030These boards are marked with 6 hand-made number on silkscreen (before 2012 year) or Datamatrix code label "IGEP0030-RE6" (2012 and later).jpg|url_official- valign=http://igep"top"|IGEP0030-RE62|[[IGEP COM MODULE]]|These boards are marked with Datamatrix code label "IGEP0030-RE6x".es/indexThey were sold since 2011.php?option=com_content&view=article&id=109&Itemid=123|url_hardware=These boards are like IGEP0030-RE6 plus manufacturing improvements and solve [http://wwwbug.igepisee.esbiz/indexview_all_bug_page.php?option=com_content&view=article&id=99&Itemid=129&dir=%2Fvar%2Fwww%2Fvhosts%2Figephardware bugs].es%2Fhttpdocs%2Fdownloads%2F01|-ISEE_Products%2FIGEP_MODULE%2FHW_User_Manuals&download_filevalign=%2Fvar%2Fwww%2Fvhosts%2Figep"top"|IGEP0030-RE7|[[IGEP COM MODULE]]|These boards are marked with 7 hand-made number on silkscreen (before 2012 year) or Datamatrix code label "IGEP0030-RE7" (2012 and later).es%2Fhttpdocs%2Fdownloads%2F01|-ISEE_Products%2FIGEP_MODULE%2FHW_User_Manuals%2FMANvalign="top"|IGEP0030-PRRE71 / IGEP0030-RE72 |[[IGEP.0030COM MODULE]]|These boards are marked with Datamatrix code label "IGEP0030-002RE7x".03They were sold since 2012.HW_USER_MANUAL.pdf|url_mechanical=These boards are like IGEP0030-RE7 plus manufacturing improvements and solve [http://wwwbug.igepisee.esbiz/indexview_all_bug_page.php?option=com_content&view=article&id=99&Itemid=129&dir=%2Fvar%2Fwww%2Fvhosts%2Figephardware bugs].es%2Fhttpdocs%2Fdownloads%2F01-ISEE_Products%2FIGEP_MODULE%2FHW_Mechanical&download_file=%2Fvar%2Fwww%2Fvhosts%2Figep.es%2Fhttpdocs%2Fdownloads%2F01-ISEE_Products%2FIGEP_MODULE%2FHW_Mechanical%2FMEC-PR-IGEP.0030-001.01-DRAWING.pdf|url_schematics}<section end=http:/IGEP0030 revisions /www.iseebcn.com}}>
<section begin=IGEP0030 expansion connectors />
=== IGEP0030 expansion connectors ===
{| cellspacing="1" cellpadding="1" border="1" align="center" width="200"
|-
| [[Image:Module description small.jpg]]
|}
IGEP0030 consist on IGEP COM MODULE, a <br>'''single mini-board''' that integrates ''NOTE: By default, J7 connector is not mounted'all the capabilities of the IGEPv2 '''but with access to just a few of them. <br>
In other words, this product is designed for those developers who already tested the IGEP Technology capabilities, for example, on IGEPv2 and they want to '''design''' their '''own product'''.<br> ==== J5 connector ====
With IGEP0030 you have '''all the IGEPv2 capabilities''' OMAP3 processor family has Camera Image Signal Processing (ISP) interface. ISP interface could to be connecting to CCD and you can '''create your own Expansion Board''' with the specific peripherals for your designCMOS image sensors.<br>
If you prefer, you can try the compatible IGEP Expansion Boards such IGEP BERLIN or BASE0010-RA for developing purposes. Otherwise, you can contact the '''[httpDetailed features of ISP are://www.iseebcn.com/ ISEE Team]''' and ask for a '''custom design''' with the peripherals, specifications, etc. of your application.
*CCD and CMOS Imager Interface
*Memory Data Input
*BT.601/BT.656 Digital YCbCr 4:2:2 (8-/10-Bit) Interface
*Glueless Interface to Common Video Decoders
*Resize Images From 1/4x to 4x
*Separate Horizontal/Vertical Control
The signals of connector J5 are connected directly to the processor.
 
{| cellspacing="1" cellpadding="1" border="1" style="width: 900px; height: 104px;"
|-
| bgcolor="#000000" |<font color="white">'''Pad''' </font>
| bgcolor="#000000" |<font color="white">'''Pad Name''' </font>
| bgcolor="#000000" |<font color="white">'''Initial mode''' </font>
| bgcolor="#000000" |<font color="white">'''Main utility''' </font>
| bgcolor="#000000" |<font color="white">'''Other available''' peripherals </font>
| bgcolor="#000000" |<font color="white">'''Share with''' </font>
|-
| 1
| GPIO94_CAM_HS
| CAM_HS(mode=0)
| LCD Horitzontal sync
| GPIO_94(mode=4)<br>HW_DBG0(mode=5)<br>SAFE_MODE(mode=7)
| -
|-
| bgcolor="#CCCCCC" |2
| bgcolor="#CCCCCC" |GPIO95_CAM_VS
| bgcolor="#CCCCCC" |GPIO_95(mode=4
| bgcolor="#CCCCCC" |-
| bgcolor="#CCCCCC" |xGPIO_95(mode=4)<br>HW_DBG1(mode=5)<br>SAFE_MODE(mode=7)
| bgcolor="#CCCCCC" |-
|-
| 3
| GPIO96_CAM_XCLKA
| CAM_XCLKA(mode=0)
| Camera interface
| GPIO_96(mode=4)<br>SAFE_MODE(mode=7)
| -
|-
| bgcolor="#CCCCCC" |4
| bgcolor="#CCCCCC" |GPIO97_CAM_PCLK
| bgcolor="#CCCCCC" |CAM_PCLK(mode=0)
| bgcolor="#CCCCCC" |Camera interface
| bgcolor="#CCCCCC" |GPIO_97(mode=4)<br>HW_DBG2(mode=5)<br>SAFE_MODE(mode=7)
| bgcolor="#CCCCCC" |-
|-
| 5
| GPIO98_CAM_FLD
| GPIO_98(mode=4)
| -
| CAM_FLD(mode=0)<br>CAM_GLOBAL_RESET(mode=2)<br>HW_DBG3(mode=5)<br>SAFE_MODE(mode=7)
| -
|-
| bgcolor="#CCCCCC" |6
| bgcolor="#CCCCCC" |GPIO99_CAM_D0
| bgcolor="#CCCCCC" |CAM_D0(mode=0)
| bgcolor="#CCCCCC" |Camera interface
| bgcolor="#CCCCCC" |GPIO_99(mode=4)<br>SAFE_MODE(mode=7)
| bgcolor="#CCCCCC" |-
|-
| 7
| GPIO100_CAM_D1
| CAM_D1(mode=0)
| Camera interface
| GPIO_100(mode=4)<br>SAFE_MODE(mode=7)
| -
|-
| bgcolor="#CCCCCC" |8
| bgcolor="#CCCCCC" |GPIO101_CAM_D2
| bgcolor="#CCCCCC" |CAM_D2(mode=0)
| bgcolor="#CCCCCC" |Camera interface
| bgcolor="#CCCCCC" |GPIO_101(mode=4)<br>HW_DBG4(mode=5)<br>SAFE_MODE(mode=7)
| bgcolor="#CCCCCC" |-
|-
| 9
| GPIO102_CAM_D3
| CAM_D3(mode=0)
| Camera interface
| GPIO_102(mode=4)<br>HW_DBG5(mode=5)<br>SAFE_MODE(mode=7)
| -
|-
| bgcolor="#CCCCCC" |10
| bgcolor="#CCCCCC" |GPIO103_CAM_D4
| bgcolor="#CCCCCC" |CAM_D4(mode=0)
| bgcolor="#CCCCCC" |Camera interface
| bgcolor="#CCCCCC" |GPIO_103(mode=4)<br>HW_DBG6(mode=5)<br>SAFE_MODE(mode=7)
| bgcolor="#CCCCCC" |-
|-
| 11
| GPIO104_CAM_D5
| CAM_D5(mode=0)
| Camera interface
| GPIO_104(mode=4)<br>HW_DBG7(mode=5)<br>SAFE_MODE(mode=7)
| -
|-
| bgcolor="#CCCCCC" |12
| bgcolor="#CCCCCC" |GPIO105_CAM_D6
| bgcolor="#CCCCCC" |CAM_D6(mode=0)
| bgcolor="#CCCCCC" |Camera Interface
| bgcolor="#CCCCCC" |GPIO_105(mode=4)<br>SAFE_MODE(mode=7)
| bgcolor="#CCCCCC" |-
|-
| 13
| GPIO106_CAM_D7
| CAM_D7(mode=0)
| Camera interface
| GPIO_106(mode=4)<br>SAFE_MODE(mode=7)
| -
|-
| bgcolor="#CCCCCC" |14
| bgcolor="#CCCCCC" |GPIO107_CAM_D8
| bgcolor="#CCCCCC" |CAM_D8(mode=0)
| bgcolor="#CCCCCC" |Camera interface
| bgcolor="#CCCCCC" |GPIO_107(mode=4)<br>SAFE_MODE(mode=7)
| bgcolor="#CCCCCC" |-
|-
| 15
| GPIO108_CAM_D9
| CAM_D9(mode=0)
| Camera interface
| GPIO_108(mode=4)<br>SAFE_MODE(mode=7)
| -
|-
| bgcolor="#CCCCCC" |16
| bgcolor="#CCCCCC" |GPIO109_CAM_D10
| bgcolor="#CCCCCC" |CAM_D10(mode=0)
| bgcolor="#CCCCCC" |Camera interface
| bgcolor="#CCCCCC" |GPIO_109(mode=4)<br>HW_DBG8(mode=5)<br>SAFE_MODE(mode=7)
| bgcolor="#CCCCCC" |-
|-
| 17
| GPIO110_CAM_D11
| CAM_D11(mode=0)
| Camera interface
| GPIO_110(mode=4)<br>HW_DBG9(mode=5)<br>SAFE_MODE(mode=7)
| -
|-
| bgcolor="#CCCCCC" |18
| bgcolor="#CCCCCC" |GPIO111_CAM_XCLKB
| bgcolor="#CCCCCC" |CAM_XCLKB(mode=0)
| bgcolor="#CCCCCC" |Camera interface
| bgcolor="#CCCCCC" |GPIO_111(mode=4)<br>SAFE_MODE(mode=7)
| bgcolor="#CCCCCC" |-
|-
| 19
| GPIO167_CAM_WEN
| GPIO_167(mode=4)
| -
| CAM_WEN(mode=0)<br>CAM_SHUTTER(mode=2)<br>HW_DBG10(mode=5)<br>SAFE_MODE(mode=7)
| -
|-
| bgcolor="#CCCCCC" |20
| bgcolor="#CCCCCC" |GPIO126_CAM_STROBE
| bgcolor="#CCCCCC" |CAM_STROBE(mode=4)
| bgcolor="#CCCCCC" |Camera interface
| bgcolor="#CCCCCC" |GPIO_126(mode=4)<br>HW_DBG11(mode=5)<br>SAFE_MODE(mode=7)
| bgcolor="#CCCCCC" |-
|-
| 21
| VIO_1V8
| -
| Power 1V8
| -
| -
|-
| bgcolor="#CCCCCC" |22
| bgcolor="#CCCCCC" |PMIC_SYSEN
| bgcolor="#CCCCCC" |-
| bgcolor="#CCCCCC" |Control Slave power ICs
| bgcolor="#CCCCCC" |-
| bgcolor="#CCCCCC" |TPS65950: CONTROL
|-
| 23
| GND
| -
| GND
| -
| -
|-
| bgcolor="#CCCCCC" |24
| bgcolor="#CCCCCC" |VBAT
| bgcolor="#CCCCCC" |-
| bgcolor="#CCCCCC" |Board supply: 3V5-4V2
| bgcolor="#CCCCCC" |-
| bgcolor="#CCCCCC" |-
|-
| 25
| GPIO63_CAM_IRQ
| GPMC_WAIT1(mode=0)
| -
| GPIO_63(mode=4)<br>SAFE_MODE(mode=7)
| -
|-
| bgcolor="#CCCCCC" |26
| bgcolor="#CCCCCC" |GPIO184_I2C3_SCL
| bgcolor="#CCCCCC" |I2C3_SCL(mode=0)
| bgcolor="#CCCCCC" |I2C Clock
| bgcolor="#CCCCCC" |GPIO_184(mode=4)<br>SAFE_MODE(mode=7)
| bgcolor="#CCCCCC" |J1 connector<br>
|-
| 27
| GPIO185_I2C3_SDA
| I2C3_SDA(mode=0)
| I2C Data
| GPIO_185(mode=4)<br>SAFE_MODE(mode=7)
| J1 connector<br>
|}
<br>
 ==== Expansion connectors interfaces ==== The IGEP MODULE has 2 connectors of 70-pin with up to 140 signals at 1V8 CMOS to suport lots of features provided by OMAP3 processor that can be used in your custom baseboard.  ===== J1 connector ===== {| cellspacing="1" cellpadding="1" border="1" style="width: 900px; height: 104px;"|-| bgcolor="#000000" |<font color="white">'''Pad '''</font>| bgcolor="#000000" |<font color="white">'''Pad Name '''</font>| bgcolor="#000000" |<font color="white">'''Initial mode '''</font>| bgcolor="#000000" |<font color="white">'''Main utility '''</font>| bgcolor="#000000" |<font color="white">'''Other available peripherals '''</font>| bgcolor="#000000" |<font color="white">'''Share with '''</font>|-| 1 | nRESET | - | Read Reset Omap | - | -|-| bgcolor="#CCCCCC" |2 | bgcolor="#CCCCCC" |DSS_D1 | bgcolor="#CCCCCC" |DSS_DATA1(mode=0) | bgcolor="#CCCCCC" |LCD pixel data bit | bgcolor="#CCCCCC" |UART1_CTS(mode=2)<br><font color="red">DSSVENC656_DATA1(mode=3)</font><br>GPIO_71(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 3 | DSS_D0 | DSS_DATA0(mode=0) | LCD pixel data bit | UART1_RTS(mode=2)<br><font color="red">DSSVENC656_DATA0(mode=3)</font><br>GPIO_70(mode=4)<br>SAFE_MODE(mode=7)  | -|-| bgcolor="#CCCCCC" |4 | bgcolor="#CCCCCC" |DSS_D3 | bgcolor="#CCCCCC" |DSS_DATA3(mode=0) | bgcolor="#CCCCCC" |LCD pixel data bit | bgcolor="#CCCCCC" |<font color="red">DSSVENC656_DATA3(mode=3)</font><br>GPIO_73(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 5 | DSS_D5 | DSS_DATA5(mode=0) | LCD pixel data bit | UART3_TX(mode=2)<br><font color="red">DSSVENC656_DATA5(mode=3)</font><br>GPIO_75(mode=4)<br>SAFE_MODE(mode=7)  | -|-| bgcolor="#CCCCCC" |6 | bgcolor="#CCCCCC" |DSS_D2 | bgcolor="#CCCCCC" |DSS_DATA2(mode=0) | bgcolor="#CCCCCC" |LCD pixel data bit | bgcolor="#CCCCCC" |<font color="red">DSSVENC656_DATA2(mode=3)</font><br>GPIO_72(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 7 | DSS_D4 | DSS_DATA4(mode=0) | LCD pixel data bit | UART3_RX(mode=2)<br><font color="red">DSSVENC656_DATA4(mode=3)</font><br>GPIO_74(mode=4)<br>SAFE_MODE(mode=7)  | -|-| bgcolor="#CCCCCC" |8 | bgcolor="#CCCCCC" |GPIO10_SYSCLK1 | bgcolor="#CCCCCC" |SYS_CLKOUT1(mode=0) | bgcolor="#CCCCCC" |Configurable output clock1 | bgcolor="#CCCCCC" |GPIO_10(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 9 | GPIO00_SYSnIRQ0 | SYS_NIRQ(mode=0) | External interrupt | GPIO_0(mode=4)<br>SAFE_MODE(mode=7) | TPS65950:CONTROL|-| bgcolor="#CCCCCC" |10 | bgcolor="#CCCCCC" |GPIO185_I2C3_SDA | bgcolor="#CCCCCC" |I2C3_SDA(mode=0) | bgcolor="#CCCCCC" |I2C3 Data | bgcolor="#CCCCCC" |GPIO_185(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |J5 connector<br>|-| 11 | DSS_D10 | DSS_DATA10(mode=0) | LCD pixel data bit | GPIO_80(mode=4)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |12 | bgcolor="#CCCCCC" |DSS_D11 | bgcolor="#CCCCCC" |DSS_DATA11(mode=0) | bgcolor="#CCCCCC" |LCD pixel data bit | bgcolor="#CCCCCC" |GPIO_81(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 13 | GPIO184_I2C3_SCL | I2C3_SCL(mode=0) | I2C3 Clock | GPIO_184(mode=0)<br>SAFE_MODE(mode=7) | J5 connector<br>|-| bgcolor="#CCCCCC" |14 | bgcolor="#CCCCCC" |GPIO186_SYSCLK2 | bgcolor="#CCCCCC" |GPIO_186(mode=4) | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |SYS_CLKOUT2(mode=0)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 15 | DSS_D22 | DSS_DATA22(mode=0) | LCD pixel data bit | MCSPI3_CS1(mode=2)<br>DSS_DATA4(mode=3)<br>GPIO_92(mode=4)<br>SAFE_MODE(mode=7)  | -|-| bgcolor="#CCCCCC" |16 | bgcolor="#CCCCCC" |GPIO147_GPT8_PWM | bgcolor="#CCCCCC" |SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |UART2_RX(mode=0)<br>MCBSP3_FSX(mode=1)<br>gpt8_PWM_EVT(mode=2)<br>GPIO_147(mode=4) | bgcolor="#CCCCCC" |-|-| 17 | DSS_D13 | DSS_DATA13(mode=0) | LCD pixel data bit | GPIO_83(mode=4)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |18 | bgcolor="#CCCCCC" |GPIO144_GPT9_PWM | bgcolor="#CCCCCC" |UART2_CTS(mode=0) | bgcolor="#CCCCCC" |UART2 Clear to send | bgcolor="#CCCCCC" |MCBSP3_DX(mode=1)<br>GPT9_PWM_EVT(mode=2)<br>GPIO_144(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 19 | DSS_D14 | DSS_DATA14(mode=0) | LCD pixel data bit | GPIO_84(mode=4)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |20 | bgcolor="#CCCCCC" |DSS_D15 | bgcolor="#CCCCCC" |DSS_DATA15(mode=0) | bgcolor="#CCCCCC" |LCD pixel data bit | bgcolor="#CCCCCC" |GPIO_85(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 21 | GPIO146_GPT11_PWM | SAFE_MODE(mode=7) | - | UART2_TX(mode=0)<br>MCBSP3_CLKX(mode=1)<br>GPT11_PWM_EVT(mode=2)<br>GPIO_146(mode=4)  | -|-| bgcolor="#CCCCCC" |22 | bgcolor="#CCCCCC" |GPIO163_IR_CTS3 | bgcolor="#CCCCCC" |UART3_CTS(mode=0) | bgcolor="#CCCCCC" |UART3 Clear to send | bgcolor="#CCCCCC" |GPIO_163(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 23 | DSS_D21 | DSS_DATA21(mode=0) | LCD pixel data bit | MCSPI3_CS0(mode=2)<br>DSS_DATA3(mode=3)<br>GPIO_91(mode=4)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |24 | bgcolor="#CCCCCC" |DSS_D17 | bgcolor="#CCCCCC" |DSS_DATA17(mode=0) | bgcolor="#CCCCCC" |LCD pixel data bit | bgcolor="#CCCCCC" |GPIO_87(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 25 | DSS_D18 | DSS_DATA18(mode=0) | LCD pixel data bit | MCSPI3_CLK(mode=2)<br>DSS_DATA0(mode=3)<br>GPIO_88(mode=4)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |26 | bgcolor="#CCCCCC" |GPIO166_IR_TXD3 | bgcolor="#CCCCCC" |UART3_TX(mode=0) | bgcolor="#CCCCCC" |UART· transfer data | bgcolor="#CCCCCC" |GPIO_166(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 27 | DSS_D19 | DSS_DATA19(mode=0) | LCD pixel data bit | MCSPI3_SIMO(mode=2)<br>DSS_DATA1(mode=3)<br>GPIO_89(mode=4)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |28 | bgcolor="#CCCCCC" |DSS_D9 | bgcolor="#CCCCCC" |DSS_DATA9(mode=0) | bgcolor="#CCCCCC" |LCD pixel data bit | bgcolor="#CCCCCC" |GPIO_79(mode=4)<br><br>HW_DBG17(mode=5)SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 29 | DSS_D7 | DSS_DATA7(mode=0) | LCD pixel data bit | UART1_RX(mode=2)<br><font color="red">DSSVENC656_DATA7(mode=3)</font><br>GPIO_77(mode=4)<br>HW_DBG15(mode=5)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |30 | bgcolor="#CCCCCC" |DSS_D8 | bgcolor="#CCCCCC" |DSS_DATA8(mode=0) | bgcolor="#CCCCCC" |LCD pixel data bit | bgcolor="#CCCCCC" |GPIO_78(mode=4)<br><br>HW_DBG16(mode=5)SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 31 | GPIO165_IR_RXD3 | UART3_RX(mode=0) | UART· Receive data | GPIO_165(mode=4)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |32 | bgcolor="#CCCCCC" |GPIO66_DSS_PCLK | bgcolor="#CCCCCC" |DSS_PCLK(mode=0) | bgcolor="#CCCCCC" |LCD Clock | bgcolor="#CCCCCC" |GPIO_66(mode=4)<br>HW_DBG12(mode=5)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 33 | DSS_D6 | DSS_DATA6(mode=0) | LCD pixel data bit | UART1_TX(mode=2)<br><font color="red">DSSVENC656_DATA6(mode=3)</font><br>GPIO_76(mode=4)<br>HW_DBG14(mode=5)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |34 | bgcolor="#CCCCCC" |GPIO68_DSS_VSYNC | bgcolor="#CCCCCC" |DSS_VSYNC(mode=0) | bgcolor="#CCCCCC" |LCD vertical sync | bgcolor="#CCCCCC" |GPIO_68(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 35 | GPIO67_DSS_HSYNC | DSS_SYNC(mode=0) | LCD horitzontal sync | GPIO_67(mode=4)<br>HW_DBG13(mode=5)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |36 | bgcolor="#CCCCCC" |PMIC_USBOTG_DP | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |TPS65950:USB;OTG Connector|-| 37 | PMIC_USBOTG_DN | - | - | - | TPS65950:USB;OTG Connector|-| bgcolor="#CCCCCC" |38 | bgcolor="#CCCCCC" |PMIC_AUXL | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |Auxiliary input left | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |TPS65950:AUX Input|-| 39 | PMIC_MIC_SUB_M | - | MIC | - | TPS65950:ANA_MIC|-| bgcolor="#CCCCCC" |40 | bgcolor="#CCCCCC" |PMIC_ADCIN4 | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |General purpouse analog input | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |TPS65950:MCPC|-| 41 | PMIC_AUXR | - | Auxiliary input right | - | TPS65950:AUX Input|-| bgcolor="#CCCCCC" |42 | bgcolor="#CCCCCC" |PMIC_PWM0 | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |PWM0 | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |TPS65950:GPIO|-| 43 | GPIO69_DSS_ACBIAS | DSS_ACBIAS(mode=0) | LCD&nbsp;Control | GPIO_69(mode=4)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |44 | bgcolor="#CCCCCC" |DSS_D16 | bgcolor="#CCCCCC" |DSS_DATA16(mode=0) | bgcolor="#CCCCCC" |LCD pixel data bit | bgcolor="#CCCCCC" |GPIO_86(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 45 | DSS_D20 | DSS_DATA20(mode=0) | LCD pixel data bit | MCSPI3_SOMI(mode=2)<br>DSS_DATA2(mode=3)<br>GPIO_90(mode=4)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |46 | bgcolor="#CCCCCC" |PMIC_USBOTG_ID | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |TPS65950:USB;OTG Connector|-| 47 | GPIO170_HDQ_1WIRE | GPIO_170(mode=4) | - | HDQ_SIO(mode=0)<br>SYS_ALTCLK(mode=1)<br>I2C2_SCCBE(mode=2)<br>I2C3_SCCBE(mode=3)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |48 | bgcolor="#CCCCCC" |PMIC_ADCIN3 | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |General purpouse analog input | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |TPS65950:MCPC|-| 49 | PMIC_PWM1 | - | PWM1 | - | TPS65950:MCPC|-| bgcolor="#CCCCCC" |50 | bgcolor="#CCCCCC" |GND | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |GND | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-|-| 51 | PMIC_ADCIN5 | - | General purpouse analog input | - | TPS65950:MCPC|-| bgcolor="#CCCCCC" |52 | bgcolor="#CCCCCC" |PMIC_VBACKUP | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |Backup Battery | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |TPS65950:Backup Battery|-| 53 | PMIC_ADCIN6 | - | General purpouse analog input | - | TPS65950:MCPC|-| bgcolor="#CCCCCC" |54 | bgcolor="#CCCCCC" |PMIC_USBOTG_VBUS | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |TPS65950:USB|-| 55 | GPIO145:GPT10_PWM | UART2_RTS(mode=0) | UART2 Ready to send | MCBSP3_DR(mode=1)<br>GPT10_PWM_EVT(mode=2)<br>GPIO_145(mode=4)<br>SAFE_MODE(mode=7)  | -|-| bgcolor="#CCCCCC" |56 | bgcolor="#CCCCCC" |GND | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |GND | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-|-| 57 | PMIC_MIC_MAIN_M | - | MIC | - | TPS65950:ANA_MIC|-| bgcolor="#CCCCCC" |58 | bgcolor="#CCCCCC" |PMIC_ADCIN2 | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |TPS65950:ADC|-| 59 | J1_SYSEN | REGEN | Master/Slave control power TPS65950 | - | -|-| bgcolor="#CCCCCC" |60 | bgcolor="#CCCCCC" |DSS_D12 | bgcolor="#CCCCCC" |DSS_DATA12(mode=0) | bgcolor="#CCCCCC" |LCD pixel data bit | bgcolor="#CCCCCC" |GPIO_82(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 61 | DSS_D23 | DSS_DATA23(mode=0) | LCD pixel data bit | DSS_DATA5(mode=3)<br>GPIO_83(mode=4)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |62 | bgcolor="#CCCCCC" |GPIO15_MCSPI3_SOMI | bgcolor="#CCCCCC" |GPIO_15(mode=4) | bgcolor="#CCCCCC" |<br> | bgcolor="#CCCCCC" |ETK_D1(mode=0)<br>MCSPI3_SOMI(mode=1)<br>HSUSB1_DATA1(mode=3)<br>MM1_TXSE0(mode5)<br><font color="red">HSUSB3_TLL_DATA1(mode=6)</font><br>HW_DBG3(mode=7) | bgcolor="#CCCCCC" |-|-| 63 | GPIO164_RTS3 | UART3_RTS(mode=0) | UART· Ready to send | GPIO_164(mode=4)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |64 | bgcolor="#CCCCCC" |PMIC_ADCIN7 | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |General purpouse analog input | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |TPS65950:Headset|-| 65 | PMIC_PWRON | - | Battery control | - | TPS65950:Control|-| bgcolor="#CCCCCC" |66 | bgcolor="#CCCCCC" |VBAT | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |Board supply: 3V5-4V2 | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-|-| 67 | VBAT | - | Board supply: 3V5-4V2 | - | -|-| bgcolor="#CCCCCC" |68 | bgcolor="#CCCCCC" |PMIC_HSOL | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |Headset output left | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |TPS65950:Headset|-| 69 | PMIC_HSOR | - | Headset output right | - | TPS65950:Headset|-| bgcolor="#CCCCCC" |70 | bgcolor="#CCCCCC" |GND | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |GND | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-|} <br> ===== J4 connector ===== {| cellspacing="1" cellpadding="1" border="1" style="width: 900px; height: 2880px;"|-| bgcolor="#000000" |<font color="white">'''Pad '''</font>| bgcolor="#000000" |<font color="white">'''Pad Name '''</font>| bgcolor="#000000" |<font color="white">'''Initial mode '''</font>| bgcolor="#000000" |<font color="white">'''Main utility '''</font>| bgcolor="#000000" |<font color="white">'''Other available peripherals '''</font>| bgcolor="#000000" |<font color="white">'''Share with '''</font>|-| 1 | VBAT | - | Board supply: 3V5-4V2 | - | -|-| bgcolor="#CCCCCC" |2 | bgcolor="#CCCCCC" |VBAT | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |Board supply: 3V5-4V2 | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-|-| 3 | GND | - | GND | - | -|-| bgcolor="#CCCCCC" |4 | bgcolor="#CCCCCC" |GPMC_nCS5 | bgcolor="#CCCCCC" |GPMC_nCS5(mode=0) | bgcolor="#CCCCCC" |General purpose memory controller | bgcolor="#CCCCCC" |SYS_NDMAREQ2(mode=1)<br>MCBSP4_DR(mode=2)<br>GPT10_PWM_EVT(mode=3)<br>GPIO_56(mode=4)<br>SAFE_MODE(mode=7)| bgcolor="#CCCCCC" |-|-| 5 | GPMC_nCS4 | GPMC_nCS4(mode=0) | General purpose memory controller | SYS_NDMAREQ1(mode=1)<br>MCBSP4_CLKX(mode=2)<br>GPT9_PWM_EVT(mode=3)<br>GPIO_55(mode=4)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |6 | bgcolor="#CCCCCC" |GPMC_nWE | bgcolor="#CCCCCC" |GPMC_nWE | bgcolor="#CCCCCC" |General purpose memory controller | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-|-| 7 | GPMC_nADV_ALE | GPMC_nADV | General purpose memory controller | - | -|-| bgcolor="#CCCCCC" |8 | bgcolor="#CCCCCC" |GPMC_nOE | bgcolor="#CCCCCC" |GPMC_nOE | bgcolor="#CCCCCC" |General purpose memory controller | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-|-| 9 | GPIO65_ETH1_IRQ1 | GPMC_WAIT3(mode=0) | - | SYS_NDMAREQ1(mode=1)<br><font color="blue">UART4_RX(mode=2)</font><br>GPIO_65(mode=4)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |10 | bgcolor="#CCCCCC" |GPIO64_ETH0_NRESET | bgcolor="#CCCCCC" |GPIO_64(mode=4) | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |GPMC_WAIT2(mode=0)<br><font color="blue">UART4_TX(mode=2)</font><br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 11 | GPMC_A2 | GPMC_A2(mode=0) | General purpose memory controller | GPIO_35(mode=4)<br>SAFE_MODE(mode=7) | Used in the IGEP COM PROTON|-| bgcolor="#CCCCCC" |12 | bgcolor="#CCCCCC" |GPMC_A8 | bgcolor="#CCCCCC" |GPMC_A8(mode=0) | bgcolor="#CCCCCC" |General purpose memory controller | bgcolor="#CCCCCC" |GPIO_41(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |Used in the IGEP COM PROTON|-| 13 | GPMC_A5 | GPMC_A5(mode=0) | General purpose memory controller | GPIO_38(mode=4)<br>SAFE_MODE(mode=7) | Used in the IGEP COM PROTON|-| bgcolor="#CCCCCC" |14 | bgcolor="#CCCCCC" |GPMC_A7 | bgcolor="#CCCCCC" |GPMC_A7(mode=0) | bgcolor="#CCCCCC" |General purpose memory controller | bgcolor="#CCCCCC" |GPIO_40(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |Used in the IGEP COM PROTON|-| 15 | GPMC_D2 | GPMC_D2 | General purpose memory controller | - | Used in the IGEP COM PROTON|-| bgcolor="#CCCCCC" |16 | bgcolor="#CCCCCC" |GPMC_D10 | bgcolor="#CCCCCC" |GPMC_D10(mode=0) | bgcolor="#CCCCCC" |General purpose memory controller | bgcolor="#CCCCCC" |GPIO_46(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |Used in the IGEP COM PROTON|-| 17 | GPMC_D3 | GPMC_D3 | General purpose memory controller | - | Used in the IGEP COM PROTON|-| bgcolor="#CCCCCC" |18 | bgcolor="#CCCCCC" |GPMC_D11 | bgcolor="#CCCCCC" |GPMC_D11(mode=0) | bgcolor="#CCCCCC" |General purpose memory controller | bgcolor="#CCCCCC" |GPIO_47(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |Used in the IGEP COM PROTON|-| 19 | GPMC_D4 | GPMC_D4 | General purpose memory controller | - | Used in the IGEP COM PROTON|-| bgcolor="#CCCCCC" |20 | bgcolor="#CCCCCC" |GPMC_D12 | bgcolor="#CCCCCC" |GPMC_D12(mode=0) | bgcolor="#CCCCCC" |General purpose memory controller | bgcolor="#CCCCCC" |GPIO_48(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |Used in the IGEP COM PROTON|-| 21 | GPMC_D5 | GPMC_D5 | General purpose memory controller | - | Used in the IGEP COM PROTON|-| bgcolor="#CCCCCC" |22 | bgcolor="#CCCCCC" |GPMC_D15 | bgcolor="#CCCCCC" |GPMC_D15(mode=0) | bgcolor="#CCCCCC" |General purpose memory controller | bgcolor="#CCCCCC" |GPIO_51(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |Used in the IGEP COM PROTON|-| 23 | GPIO13_MMC3_CMD | GPIO_13(mode=4) | -| ETK_CTL(mode=0)<br>MMC3_CMD(mode=2)<br>HSUSB1_CLK(mode=3)<br><font color="red">HSUSB1_TLL_CLK(mode=6)</font><br>HW_DBG1(mode=7) | -|-| bgcolor="#CCCCCC" |24 | bgcolor="#CCCCCC" |GPIO148_TXD1 | bgcolor="#CCCCCC" |UART1_TX(mode=0) | bgcolor="#CCCCCC" |Transmited serial UART | bgcolor="#CCCCCC" |GPIO_148(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 25 | GPIO176_SPI1_CS2 | GPIO_176(mode=4) | - | MCSPI1_CS2(mode=0)<br>MMC3_CLK(mode=3)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |26 | bgcolor="#CCCCCC" |GPIO18_MMC3_D0 | bgcolor="#CCCCCC" |GPIO_18(mode=4) | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |ETK_D4(mode=0)<br>MCBSP5_DR(mode=1)<br>MMC3_DAT0(mode=2)<br>HSUSB1_DATA4(mode=3)<br><font color="red">HSUSB1_TLLDATA4(mode=6)</font><br>HW_DBG6(mode=7) | bgcolor="#CCCCCC" |-|-| 27 | GPIO174_SPI1_CS2 | McSPI1_CS0(mode=0) | Chip select 0 | MMC2_DAT7(mode=1)<br>GPIO_174(mode=4)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |28 | bgcolor="#CCCCCC" |GPIO53_GPMC_nCS2 | bgcolor="#CCCCCC" |GPIO_53(mode=4) | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |GPMC_NCS2(mode=0)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 29 | GPIO14_MMC3_D4 | GPIO_14(mode=4) | - | ETK_D0(mode=0)<br>MCSPI3_SIMO(mode=1)<br>MMC3_DAT4(mode=2)<br>HSUSB1_DATA0(mode=3)<br>MM1_RXCV(mode=5)<br><font color="red">HSUSB1_TLL_DATA0(mode=6)</font><br>HW_DBG2(mode=7) | -|-| bgcolor="#CCCCCC" |30 | bgcolor="#CCCCCC" |GPIO21_MMC3_D7 | bgcolor="#CCCCCC" |GPIO_21(mode=4) | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |ETK_D7(mode=0)<br>MCSPI3_CS1(mode=1)<br>MMC3_DAT7(mode=2)<br>HSUSB1_DATA3(mode=3)<br>MM1_TXEN_N(mode=5)<br><font color="red">HSUSB1_TLL_DATA3(mode=6)</font><br>HW_DBG9(mode=7) | bgcolor="#CCCCCC" |-|-| 31 | GPIO17_MMC3_D3 | GPIO_17(mode=4) | - | ETK_D3(mode=0)<br>MCSPI3_CLK(mode=1)<br>MMC3_DAT3(mode=2)<br>HSUSB1_DATA7(mode=3)<br><font color="red">HSUSB1_TLL_DATA7(mode=6)</font><br>HW_DBG5(mode=7) | -|-| bgcolor="#CCCCCC" |32 | bgcolor="#CCCCCC" |HUSBH_VBUS | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |USB2| bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |USB3326|-| 33 | GND | - | GND | - | -|-| bgcolor="#CCCCCC" |34 | bgcolor="#CCCCCC" |HSUSB_DP | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |USB2 | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |USB3326|-| 35 | HSUSB_DM | - | USB2 | - | USB3326|-| bgcolor="#CCCCCC" |36 | bgcolor="#CCCCCC" |GPIO19_MMC3_D1 | bgcolor="#CCCCCC" |GPIO_19(mode=4) | bgcolor="#CCCCCC" |-| bgcolor="#CCCCCC" |ETK_D5(mode=0)<br>MCSPI5_FSX(mode=1)<br>MMC3_DAT1(mode=2)<br>HSUSB1_DATA5(mode=3)<br><font color="red">HSUSB1_TLL_DATA5(mode=6)</font><br>HW_DBG7(mode=7) | bgcolor="#CCCCCC" |-|-| 37 | GPIO22_MMC3_D6 | SYS_DRM_MSECURE(mode=1) | - | ETK_D8(mode=0)<br>MMC3_DAT6(mode=2)<br>HSUSB1_DIR(mode=3)<br>GPIO_22(mode=4)<br><font color="red">HSUSB1_TLL_DIR(mode=6)</font><br>HW_DBG10(mode=7) | -|-| bgcolor="#CCCCCC" |38 | bgcolor="#CCCCCC" |GPIO23_MMC3_D5 | bgcolor="#CCCCCC" |GPIO_23(mode=4) | bgcolor="#CCCCCC" |-| bgcolor="#CCCCCC" |ETK_D9(mode=0)<br>SYS_SECURE_INDICATOR(mode=1)<br>MMC3_DAT5(mode=2)<br>HSUSB1_NXT(mode=3)<br><font color="red">HSUSB1_TLL_NXT(mode=6)</font><br>HW_DBG11(mode=7) | bgcolor="#CCCCCC" |-|-| 39 | GPIO20_MMC3_D2 | GPIO_20(mode=4) | -| ETK_D6(mode=0)<br>MCBSP5_DX(mode=1)<br>MMC3_DAT2(mode=2)<br>HSUSB1_DATA6(mode=3)<br><font color="red">HSUSB1_TLL_DATA6(mode=6)</font><br>HW_DBG8(mode=7)  | -|-| bgcolor="#CCCCCC" |40 | bgcolor="#CCCCCC" |GPIO12_MMC3_CLK | bgcolor="#CCCCCC" |GPIO_12(mode=4) | bgcolor="#CCCCCC" |-| bgcolor="#CCCCCC" |ETK_CLK(mode=0)<br>MCBSP5_CLKX(mode=1)<br>MMC3_CLK(mode=2)<br>HSUSB1_STP(mode=3)<br>MM1_RXDP(mode=5)<br><font color="red">HSUSB1_TLL_STP(mode=6)</font><br>HW_DBG0(mode=7) | bgcolor="#CCCCCC" |-|-| 41 | GPIO114_SPI1_NIRQ | GPIO_114(mode=4) | - | SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |42 | bgcolor="#CCCCCC" |GPIO175_SPI1_CS1 | bgcolor="#CCCCCC" |GPIO_175(mode=4) | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |MCSPI1_CS1(mode=0)<br>MMC3_CMD(mode=3)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 43 | GPIO171_SPI1_CLK | McSPI1_CLK(mode=0) | Clock| MMC2_DAT4(mode=1)<br>GPIO_171(mode=4)<br>SAFE_MODE(mode=7)  | -|-| bgcolor="#CCCCCC" |44 | bgcolor="#CCCCCC" |GPIO172_SPI1_SIMO | bgcolor="#CCCCCC" |McSPI1_SIMO(mode=0) | bgcolor="#CCCCCC" |Slave input master output<br> | bgcolor="#CCCCCC" |MMC2_DAT5(mode=1)<br>GPIO_172(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 45 | GPIO173_SPI1_SOMI | McSPI1_SOMI(mode=0) | Slave output master input<br> | MMC2_DAT6(mode=1)<br>GPIO_173(mode=4)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |46 | bgcolor="#CCCCCC" |GPIO149_MMC3_CD | bgcolor="#CCCCCC" |UART1_RTS(mode=0) | bgcolor="#CCCCCC" |Uart ready to send| bgcolor="#CCCCCC" |GPIO_149(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 47 | GPIO150_MMC3_WP | UART1_CTS(mode=0) | Uart clear to send| GPIO_150(mode=4)<br><font color="red">HSUSB3_TLL_CLK(mode=6)</font><br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |48 | bgcolor="#CCCCCC" |GPIO151_RXD1 | bgcolor="#CCCCCC" |UART1_RX(mode=0) | bgcolor="#CCCCCC" |Received serial UART| bgcolor="#CCCCCC" |MCBSP1_CLKR(mode=2)<br>MCSPI4_CLK(mode=3)<br>GPIO_151(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 49 | GPMC_D7 | GPMC_D7 | General purpose memory controller | - | Used in the IGEP COM PROTON|-| bgcolor="#CCCCCC" |50 | bgcolor="#CCCCCC" |GPMC_D14 | bgcolor="#CCCCCC" |GPMC_D14(mode=0) | bgcolor="#CCCCCC" |General purpose memory controller | bgcolor="#CCCCCC" |GPIO_50(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |Used in the IGEP COM PROTON|-| 51 | GPMC_D6 | GPMC_D6 | General purpose memory controller | - | Used in the IGEP COM PROTON|-| bgcolor="#CCCCCC" |52 | bgcolor="#CCCCCC" |GPMC_D13 | bgcolor="#CCCCCC" |GPMC_D13(mode=0) | bgcolor="#CCCCCC" |General purpose memory controller | bgcolor="#CCCCCC" |GPIO_49(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |Used in the IGEP COM PROTON|-| 53 | GPMC_D1 | GPMC_D1 | General purpose memory controller | - | Used in the IGEP COM PROTON|-| bgcolor="#CCCCCC" |54 | bgcolor="#CCCCCC" |GPMC_D8 | bgcolor="#CCCCCC" |GPMC_D8(mode=0) | bgcolor="#CCCCCC" |General purpose memory controller | bgcolor="#CCCCCC" |GPIO_44(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |Used in the IGEP COM PROTON|-| 55 | GPMC_D9 | GPMC_D9(mode=0) | General purpose memory controller | GPIO_45(mode=4)<br>SAFE_MODE(mode=7) | Used in the IGEP COM PROTON|-| bgcolor="#CCCCCC" |56 | bgcolor="#CCCCCC" |GPMC_D0 | bgcolor="#CCCCCC" |GPMC_D0 | bgcolor="#CCCCCC" |General purpose memory controller | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |Used in the IGEP COM PROTON|-| 57 | GPMC_A6 | GPMC_A6(mode=0) | General purpose memory controller | GPIO_39(mode=4)<br>SAFE_MODE(mode=7) | Used in the IGEP COM PROTON|-| bgcolor="#CCCCCC" |58 | bgcolor="#CCCCCC" |GPMC_A1 | bgcolor="#CCCCCC" |GPMC_A1(mode=0) | bgcolor="#CCCCCC" |General purpose memory controller | bgcolor="#CCCCCC" |GPIO_34(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |Used in the IGEP COM PROTON|-| 59 | GPMC_A3 | GPMC_A3(mode=0) | General purpose memory controller | GPIO_36(mode=4)<br>SAFE_MODE(mode=7) | Used in the IGEP COM PROTON|-| bgcolor="#CCCCCC" |60 | bgcolor="#CCCCCC" |GPMC_A10 | bgcolor="#CCCCCC" |GPMC_A10(mode=0) | bgcolor="#CCCCCC" |General purpose memory controller | bgcolor="#CCCCCC" |SYS_NDMAREQ3(mode=1)<br>GPIO_43(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |Used in the IGEP COM PROTON|-| 61 | GPMC_A4 | GPMC_A4(mode=0) | General purpose memory controller | GPIO_37(mode=4)<br>SAFE_MODE(mode=7) | Used in the IGEP COM PROTON|-| bgcolor="#CCCCCC" |62 | bgcolor="#CCCCCC" |GPMC_A9 | bgcolor="#CCCCCC" |GPMC_A9(mode=0) | bgcolor="#CCCCCC" |General purpose memory controller | bgcolor="#CCCCCC" |SYS_NDMAREQ2(mode=1)<br>GPIO_42(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |Used in the IGEP COM PROTON|-| 63 | GPMC_nWP | GPMC_nWP(mode=0) | General purpose memory controller | GPIO_62(mode=4)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |64 | bgcolor="#CCCCCC" |GPMC_nCS1 | bgcolor="#CCCCCC" |GPMC_nCS1(mode=0) | bgcolor="#CCCCCC" |General purpose memory controller | bgcolor="#CCCCCC" |GPIO_52(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 65 | GPMC_nBE0_CLE | GPMC_nBE0(mode=0) | General purpose memory controller | GPIO_60(mode=4)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |66 | bgcolor="#CCCCCC" |GPMC_nCS0 | bgcolor="#CCCCCC" |GPMC_nCS0 | bgcolor="#CCCCCC" |General purpose memory controller | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-|-| 67 | GPMC_nCS6 | GPMC_nCS6(mode=0) | General purpose memory controller | MCBSP4_DX(mode=2)<br>GPT11_PWM_EVT(mode=3)<br>GPIO_57(mode=4)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |68 | bgcolor="#CCCCCC" |GPMC_WAIT0 | bgcolor="#CCCCCC" |GPMC_WAIT0(mode=0) | bgcolor="#CCCCCC" |General purpose memory controller | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-|-| 69 | GPMC_nBE1 | GPMC_nBE1(mode=0) | General purpose memory controller | GPIO_61(mode=4)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |70 | bgcolor="#CCCCCC" |GPMC_CLK | bgcolor="#CCCCCC" |GPMC_CLK(mode=0) | bgcolor="#CCCCCC" |General purpose memory controller | bgcolor="#CCCCCC" |GPIO_59(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|} USB3326: Miniature Hi-Speed USB Transceiver <br><section end=IGEP0030 expansion connectors /> [[Category:IGEP_Processor_BoardsIGEP Processor Boards]]
0
edits
Retrieved from "http://labs.isee.biz/index.php?title=Special:MobileDiff/4577...8787"