Personal tools

Log in

Changes

From IGEP - ISEE Wiki

Jump to: navigation, search

Category:IGEP0020

35,319 bytes added, 12:03, 25 September 2015
no edit summary
<section begin=IGEP0020 revisions />=== IGEP0020 Main Page revisions ===
IGEP0020 (IGEPv2 Board) is a {|cellpadding=4|-|'''low-costRevision''', |'''fan-lessName''' single board computer that unleashes |'''laptop-like performanceComments''' |-|IGEP0020-RA|[[IGEPv2]]|Not for general public. Only few Premium customers have this board revision|-|IGEP0020-RB1|[[IGEPv2]]|These boards are made from the year 2009 to 2010. They are not available anymore (see IGEP0020-RC3 below)|-|IGEP0020-RCX|[[IGEPv2]]|These boards are made from the year 2010 to 2011|- valign="top"|IGEP0020-RC1|[[IGEPv2]]|These boards are marked with "1" hand-made number on silkscreen box of IGEP0020-RC.These boards are shipped with OMAP3530 and wireless.MODEL: IGEP0020-RC1-OMAP3530-720Mhz|- valign="top"|IGEP0020-RC2|[[IGEPv2]]|These boards are marked with "2" hand-made number on silkscreen box of IGEP0020-RC.These boards are shipped with OMAP3530 and without wireless.MODEL: IGEP0020-RC2-OMAP3530-720Mhz-NOWIFI|- valign="top"|IGEP0020-RC3|[[IGEPv2]]|These boards are marked with "3" hand-made number on silkscreen box of IGEP0020-RC.These boards are shipped with OMAP3530 and wireless with [[Frequently Asked Questions and Their Answers#Is_it_possible_to_config_the_wireless_LAN_and_bluetooth_so_they_are_completely_off.2C_and_not_consuming_any_power_at_all.3F|IGEP0020-RB1 backward compatibility]]. They are for customers who need [[Frequently Asked Questions and Their Answers#What_means_.22IGEP2:_Hardware_Revision_B.2FC_.28B_compatible.29.22.3F|IGEP0020RB1 boards]]. |- valign="top"|IGEP0020-RC4|[[IGEPv2]]|These boards are marked with "4" hand-made number on silkscreen box of IGEP0020-RC.These boards are shipped with DM3730 and wireless. MODEL: IGEP0020-RC4-DM3730-1GHz|- valign="top"|IGEP0020-RC5|[[IGEPv2]]|These boards are marked with "5" hand-made number on silkscreen box of IGEP0020-RC.These boards are shipped with DM3730 and '''expandability''' without the bulkwireless. MODEL: IGEP0020-RC5-DM3730-1GHz-NOWIFI |- valign="top"|IGEP0020-RC6|[[IGEPv2]]|These boards are marked with "6" hand-made number on silkscreen box of IGEP0020-RC (before 2012 year) or Datamatrix code label "IGEP0020-RC6" (2012 and later).These boards are shipped with DM3730 and wireless, expensebut they ship NANDFlash memory.|- valign="top"|IGEP0020-RC61 |[[IGEPv2]]|These boards are marked with Datamatrix code label "IGEP0020-RC6x"These boards are like IGEP0020-RC6 plus manufacturing improvements and solve [http://bug.isee.biz/view_all_bug_page.php hardware bugs].|- valign="top"|IGEP0020-RC7|[[IGEPv2]]|These boards are marked with "7" hand-made number on silkscreen box of IGEP0020-RC (before 2012 year) or Datamatrix code label "IGEP0020-RC7" (2012 and later).These boards are shipped with DM3730 and without wireless, or noise of typical desktop machinesbut they ship NANDFlash memory.|}<brsection end=IGEP0020 revisions />
This board, which is designed by ISEE as '''part of the IGEPv2 Platform''', pretends to be a '''starter board for testing''' the main capabilities of the IGEP Platform boards and for '''developing your own applications'''. This board can be used as a final product as well for those who do not need extra interfaces or extra design requirements.<brsection begin=IGEP0020 expansion connectors />  === IGEP0020 expansion connectors === {| cellspacing="1" cellpadding="1" border="1" align="center" width="200"|-| [[Image:Igepv2 rc photo2.jpg]]|}
<br>
==== J990 connector ==== Using this expansion connector you have access to McBSP1, McBSP3, I2C2, MMC2(8 bits), nReset and REGEN signals from OMAP Processor. The interface is at 1.8V on all signals. Only 1.8V CMOS levels are supported. Do not expose the header to 3.3V.  J990 connector is [http://beagleboard.org/ BeagleBoard] compatible expansion connector. IGEPv2-NOWIFI board is fully compatible. Other IGEPv2 board versions need software configuration to disable wifi interface and others because of shared hardware lines. MMC2 interface is used by wifi module. McBSP3 interface is used by PCM TPS65950 interface.  See which versions have WIFI/BT combo [[IGEP_Technology_devices_revisions|available]].  {| width="865" cellspacing="41" cellpadding="41" border="41" align="centerJUSTIFY" style="width: 900px; height: 1740px;"|-| bgcolor="#000000" |<font color="white">'''Pad '''</font>| bgcolor="#000000" |<font color="white">'''Pad Name '''</font>| bgcolor="#000000" |<font color="white">'''Initial mode '''</font>| bgcolor="#000000" |<font color="white">'''Main utility '''</font>| bgcolor="#000000" |<font color="white">'''Other available peripherals '''</font>| bgcolor="#000000" |<font color="white">'''Share with'''</font>|-| 1 | VIO 1V8 | - | Power 1v8 | - | -
|-
| stylebgcolor="text#CCCCCC" |2 | bgcolor="#CCCCCC" |DC 5V | bgcolor="#CCCCCC" |-align: center;| bgcolor="#CCCCCC" | '''IGEP0020''' Power 5v | stylebgcolor="text#CCCCCC" |-align: center;| bgcolor="#CCCCCC" | '''Main Resources for this board:'''-
|-
| style3 | MMC2_DAT7 | GPIO_139(mode=4) | Reset WIFI | MMC2_DAT7(mode=0)<br>MMC2_CLKIN(mode="text-align: center;" rowspan1)<br>MMC3_DAT3(mode="3" | [[Image:Igep0020 id.jpg|281x181px]])<br> | style<font color="text-align: center;red" | Official [http:>HSUSB3_TLL_NXT(mode=5)<//igep.es/index.php?optionfont><br>MM3_RXDM(mode=com_content&view6)<br>SAFE_MODE(mode=article&id=46&Itemid=55 IGEP0020 Website]7)  | WIFI/BT combo:WIFI
|-
| bgcolor="#CCCCCC" |5 | bgcolor="#CCCCCC" |MMC2_DAT6 | bgcolor="#CCCCCC" |GPIO_138(mode=4) | bgcolor="#CCCCCC" |Power down WIFI | bgcolor="#CCCCCC" |MMC2_DAT6(mode=0)<br>MMC2_DIR_CMD(mode=1)<br>CAM_SHUTTER(mode=2)<br>MMC3_DAT2(mode=3)<br><font color="red">HSUSB3_TLL_DIR(mode=5)</font><br>SAFE_MODE(mode=7)  | bgcolor="#CCCCCC" |WIFI/BT combo:WIFI|-| 7 | MMC2_DAT5 | GPIO_137(mode=4) | Reset BT | MMC2_DAT5(mode=0)<br>MMC2_DIR_DAT1(mode=1)<br>CAM_GLOBAL_RESET(mode=2)<br>MMC3_DAT1(mode=3)<br><font color="red">HSUSB3_TLL_STP(mode=5)</font><br>MM3_RXDP(mode=6)<br>SAFE_MODE(mode=7)  | WIFI/BT combo:BT|-| bgcolor="#CCCCCC" |9 | bgcolor="#CCCCCC" |MMC2_DAT4 | bgcolor="#CCCCCC" |GPIO136(mode=4) | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |MMC2_DAT4(mode=0)<br>MMC_DIR_DAT0(mode=1)<br>MMC3_DAT0(mode=3)<br>SAFE_MODE(mode=7)  | bgcolor="#CCCCCC" |-|-| 11 | MMC2_DAT3 | MMC2_DAT3(mode=0) | Transfer data | McSPI3_CS0(mode=1)<br>GPIO_135(mode=4)<br>SAFE_MODE(mode=7)  | WIFI/BT combo:WIFI|-| bgcolor="#CCCCCC" |13 | bgcolor="#CCCCCC" |MMC2_DAT2 | bgcolor="#CCCCCC" |MMC2_DAT2(mode=0) | bgcolor="#CCCCCC" |Transfer data | bgcolor="#CCCCCC" |McSPI3_CS1(mode=1)<br>GPIO_134(mode=4)<br>SAFE_MODE(mode=7)  | bgcolor="#CCCCCC" |WIFI/BT combo:WIFI|-| 15 | MMC2_DAT1 | MMC2_DAT1(mode=0) | Transfer data | GPIO_133(mode=4)<br>SAFE_MODE(mode=7) | WIFI/BT combo:WIFI|-| bgcolor="#CCCCCC" |17 | bgcolor="#CCCCCC" |MMC2_DAT0 | bgcolor="#CCCCCC" |MMC2_DAT0(mode=0) | bgcolor="#CCCCCC" |Transfer data | bgcolor="#CCCCCC" |McSPI3_SOMI(mode=1)<br>GPIO_132(mode=4)<br>SAFE_MODE(mode=7)  | bgcolor="#CCCCCC" |WIFI/BT combo:WIFI|-| 19 | MMC2_CMD | MMC2_CMD(mode=0) | Control Wire for bus MMC2 (WIFI) | McSPI3_SIMO(mode=1)<br>GPIO_131(mode=4)<br>SAFE_MODE(mode=7)  | WIFI/BT combo:WIFI|-| bgcolor="#CCCCCC" |21 | bgcolor="#CCCCCC" |MMC2_CLK0 | bgcolor="#CCCCCC" |MMC2_CLK(mode=0) | bgcolor="#CCCCCC" |Clock for MMC2 (WIFI) | bgcolor="#CCCCCC" |McSPI3_CLK(mode=1)<br>GPIO_130(mode=4)<br>SAFE_MODE(mode=7)  | bgcolor="#CCCCCC" |WIFI/BT combo:WIFI|-| 4 | MCBSP3_DX | MCBSP3_DX (mode=0) | Transmitted serial Data (BT audio) | UART2_CTS(mode=1)<br>GPIO_140(mode=4)<br><font color="red">HSUSB3_TLL_D4(mode=5)</font><br>SAFE_MODE(mode=7)  | TPS65950: PCM VSP|-| bgcolor="#CCCCCC" |6 | bgcolor="#CCCCCC" |MCBSP3_CLKX | bgcolor="#CCCCCC" |MCBSP3_CLKX(mode=0) | bgcolor="#CCCCCC" |Transmitted serial Clock (BT audio) | bgcolor="#CCCCCC" |UART2_TX(mode=1)<br>GPIO_142(mode=4)<br><font color="red">HSUSB3_TLL_D6(mode=5)</font><br>SAFE_MODE(mode=7)  | bgcolor="#CCCCCC" |BT/TPS65950: PCM VSP|-| 8 | MCBSP3_FSX | MCBSP3_FSX (mode=0) | Transmited Frame Syncronisation (BT audio) | UART2_RX(mode=1)<br>GPIO_143(mode=4)<br><font color="red">HSUSB3_TLL_D7(mode=5)</font><br>SAFE_MODE(mode=7)  | BT/TPS65950: PCM VSP|-| bgcolor="#CCCCCC" |10 | bgcolor="#CCCCCC" |MCBSP3_DR | bgcolor="#CCCCCC" |MCBSP3_DR (mode=0) | bgcolor="#CCCCCC" |Received Serial Data (BT audio) | bgcolor="#CCCCCC" |UART2_RTS(mode=1)<br>GPIO_141(mode=4)<br><font color="red">HSUSB3_TLL_D5(mode=5)</font><br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |TPS65950: PCM VSP|-| 12 | MCBSP1_DX | GPIO_158(mode=4) | - | MCBSP1_DX(mode=0)<br>McSPI4_SIMO(mode=1)<br>McBSP3_DX(mode=2)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |14 | bgcolor="#CCCCCC" |MCBSP1_CLKX | bgcolor="#CCCCCC" |GPIO_162(mode=4) | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |MCBSP1_CLKX(mode=0)<br>McBSP3_CLKX(mode=2)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 16 | MCBSP1_FSX | GPIO_161(mode=4) | - | MCBSP1_FSX(mode=0)<br>McSPI4_CS0(mode=1)<br>McBSP3_FSX(mode=2)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |18 | bgcolor="#CCCCCC" |MCBSP1_DR | bgcolor="#CCCCCC" |GPIO_159(mode=4) | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |MCBSP1_DR(mode=0)<br>McSPI4_SOMI(mode=1)<br>McBSP3_DR(mode=2)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 20 | MCBSP1_CLKR | GPIO_156(mode=4) | - | MCBSP1_CLKR(mode=0)<br>MCSPI4_CLK(mode=1)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |22 | bgcolor="#CCCCCC" |MCBSP1_FSR | bgcolor="#CCCCCC" |GPIO_157(mode=4) | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |MCBSP1_FSR(mode=0)<br>CAM_GLOBAL_RESET(mode=2)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 23 | I2C2_SDA | I2C2_SDA(mode=0) | I2C2 Data | GPIO_183(mode=4)<br>SAFE_MODE(mode=7) | CAM if configured via hardware: RC14|-| bgcolor="#CCCCCC" |24 | bgcolor="#CCCCCC" |I2C2_SCL | bgcolor="#CCCCCC" |I2C2_SCL(mode=0) | bgcolor="#CCCCCC" |I2C2 Clock | bgcolor="#CCCCCC" |GPIO_168(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |CAM if configured via hardware: RC13|-| 25 | REGEN | - | Master/Slave control power TPS65950 | - | -|-| bgcolor="#CCCCCC" |26 | bgcolor="#CCCCCC" |nRESET | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |Read Reset Omap | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-|-| 27 | GND | - | GND | - | -|-| bgcolor="#CCCCCC" |28 | bgcolor="#CCCCCC" |GND | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |GND | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-|} <br> ==== J960 connector ==== This connector is used mainly to connect via serie to IGEP Software using [http://en.wikipedia.org/wiki/RS-232 RS232 standard].  On IGEPv2 revision B:  *This J960 connector has only Debug RS232 interface *So, it is needed null modem configuration (direct connection between two computers). RX and TX lines are crossed in this null modem configuration between two equipments (TX1-&gt;RX2 / TX2-&gt;RX1). On IGEPv2 revision C:  *You should modify your serial debug cable in order not to damage your serial PC port.&nbsp; *Additional RS232 port (UART1) on same J960 connector. It is only needed to&nbsp; rotate 180o the IDC-10 (AT-Everex) to DB9 cable. *It has been added resistors for alternative UART1, UART2 and UART3 hardware selection. *See [[How to use UARTs#RS232_Schematic_Igep_V2|Schematics]] (RC) for more information. {| cellspacing="1" cellpadding="1" border="1" style="textwidth: 900px; height: 308px;"|-| bgcolor="#000000" |<font color="white">'''Pad '''</font>| bgcolor="#000000" |<font color="white">'''Pad Name '''</font>| bgcolor="#000000" |<font color="white">'''Initial mode '''</font>| bgcolor="#000000" |<font color="white">'''Main utility '''</font>| bgcolor="#000000" |<font color="white">'''Other available peripherals (only via hardware) '''</font>| bgcolor="#000000" |<font color="white">'''Share with '''</font> |-| 1 | - | - | - | - | -|-| bgcolor="#CCCCCC" |2 | bgcolor="#CCCCCC" |RS232_RX2 | bgcolor="#CCCCCC" |UART3_RX(R966) | bgcolor="#CCCCCC" |Serial debug | bgcolor="#CCCCCC" |UART2_RX(R952) only RC | bgcolor="#CCCCCC" |SN65C3232EPW|-| 3 | RS232_TX2 | UART3_TX(R965) | Serial debug | UART2_TX(R947) only RC | SN65C3232EPW|-| bgcolor="#CCCCCC" |4 | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-|-| 5 | GND | - | GND | - | -|-| bgcolor="#CCCCCC" |6 | bgcolor="#CCCCCC" |GND | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |GND | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-|-| 7 | - | - | - | - | -|-| bgcolor="#CCCCCC" |8 | bgcolor="#CCCCCC" |RS232_TX1 | bgcolor="#CCCCCC" |UART1_TX(R961) | bgcolor="#CCCCCC" |-align| bgcolor="#CCCCCC" |UART3_TX(R940) only RC | bgcolor="#CCCCCC" |SN65C3232EPW|-| 9 | RS232_RX1 | UART1_RX(R962) | - | UART3_RX(R942) only RC | SN65C3232EPW|-| bgcolor="#CCCCCC" |10 | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-|} SN65C3232EPW: centerIC RS232 LINE DVR/RCVR <br> ==== J940 connector ==== This connector is used mainly to connect via RS485 (UART1) with other devices. User can use this connector to power the board with 5VDC. Use only 5V regulated DC. The IGEPv2 BOARD does not use this 9v power supply. Only on IGEPv2 revision B, the PWR_9V input is directly routed to JC01 and J971 connectors. On IGEPv2 revision C is not available.  {| cellspacing="1" cellpadding="1" border="1" style="width: 900px;height: 104px;"|-| bgcolor="#000000" |<font color="white">'''Pad '''</font>| bgcolor="#000000" | <font color="white">'''Pad Name '''</font>Official | bgcolor="#000000" |<font color="white">'''Initial mode '''</font>| bgcolor="#000000" |<font color="white">'''Main utility '''</font>| bgcolor="#000000" |<font color="white">'''Other available peripherals '''</font>| bgcolor="#000000" |<font color="white">'''Share with '''</font>|-| 1 | PWR_GND | GND | - | - | -|-| bgcolor="#CCCCCC" |2 | bgcolor="#CCCCCC" |PWR_5V | bgcolor="#CCCCCC" |Power 5v | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-|-| 3 | PWR_9V | (Not connected) | - | - | -|-| bgcolor="#CCCCCC" |4 | bgcolor="#CCCCCC" |RS485_A | bgcolor="#CCCCCC" |UART3_RX/UART3_TX | bgcolor="#CCCCCC" |A aka '−' aka TxD-/RxD- aka inverting pin | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |TXS0102DCUR|-| 5 | RS485_B | UART3_RX/UART3_TX | B aka '+' aka TxD+/RxD+ aka non-inverting pin | - | TXS0102DCUR|} TXS0102DCUR: Bidirectional voltage-level translator <br> ==== J400 connector ==== J400 is used to [http://igepen.eswikipedia.org/indexwiki/Jtag JTAG] (Joint Test Action Group).php?optionJTAG is a standardized serial protocol widely used in printed circuit boards. Its main functions are:  *Debug the software of an embedded system directly *Storing firmware *Boundary scan testing JTAG Suggested:  *JTAG Debugger XDS510+ USB from Spectrum Digital with Code Composer Studio 3.3 or higher. *JTAG Debugger XD100v2 USB from Spectrum Digital with Code Composer Studio 4 or higher. {| cellspacing="1" cellpadding="1" border="1" style="width: 900px; height: 104px;"|-| bgcolor="#000000" |<font color="white">'''Pad '''</font>| bgcolor="#000000" |<font color="white">'''Pad Name '''</font>| bgcolor="#000000" |<font color="white">'''Initial mode '''</font>| bgcolor="#000000" |<font color="white">'''Main utility '''</font>| bgcolor="#000000" |<font color="white">'''Other available peripherals '''</font>| bgcolor="#000000" |<font color="white">'''Share with '''</font>|-| 1 | JTAG_TMS | JTAG_TMS | <br> | - | -|-| bgcolor="#CCCCCC" |2 | bgcolor="#CCCCCC" |JTAG_NTRST | bgcolor="#CCCCCC" |JTAG_NTRST | bgcolor="#CCCCCC" |<br> | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-|-| 3 | JTAG_TDI | JTAG_TDI | <br> | - | -|-| bgcolor="#CCCCCC" |4 | bgcolor="#CCCCCC" |GND | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |GND | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-|-| 5 | 1V8 | Power 1V8 | <br> | - | -|-| bgcolor="#CCCCCC" |6 | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |<br> | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-|-| 7 | JTAG_TD0 | JTAG_TD0 | <br> | - | -|-| bgcolor="#CCCCCC" |8 | bgcolor="#CCCCCC" |GND | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |GND | bgcolor="#CCCCCC" |- | bgcolor=com_content&view"#CCCCCC" |-|-| 9 | JTAG_RTCK | JTAG_RTCK | <br> | - | -|-| bgcolor="#CCCCCC" |10 | bgcolor="#CCCCCC" |GND | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |GND | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-|-| 11 | JTAG_TCK | JTAG_TCK | <br> | - | -|-| bgcolor="#CCCCCC" |12 | bgcolor="#CCCCCC" |GND | bgcolor=article&id"#CCCCCC" |- | bgcolor=99&Itemid"#CCCCCC" |GND | bgcolor=129&dir"#CCCCCC" |- | bgcolor=%2Fvar%2Fwww%2Fvhosts%2Figep.es%2Fhttpdocs%2Fdownloads%2F01"#CCCCCC" |-|-ISEE_Products%2FIGEPv2%2FHW_User_Manuals&download_file| 13 | JTAG_EMU0 | JTAG_EMU0(mode=0) | <br> | GPIO_11(mode=4)<br>SAFE_MODE(mode=%2Fvar%2Fwww%2Fvhosts%2Figep.es%2Fhttpdocs%2Fdownloads%2F017) | -|-ISEE_Products%2FIGEPv2%2FHW_User_Manuals%2FMAN| bgcolor="#CCCCCC" |14 | bgcolor="#CCCCCC" |JTAG_EMU1 | bgcolor="#CCCCCC" |JTAG_EMU1(mode=0) | bgcolor="#CCCCCC" |<br> | bgcolor="#CCCCCC" |GPIO_31(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-PR|} <br> ==== J970 connector ==== J970 is used to implement a keypad, it is connected to TPS65950. The keypad interface controller provides an enhanced keypad decode capability and simultaneously reduces host processor software overhead. When a key button of the keyboard matrix is pressed the corresponding row and column lines are shorted together. To allow key press detection, all input pins (KBR) are pulled up to VCC and all output pins (KBC) driven to a low level. Any action on a button generates an interrupt to the sequencer. The decoding sequence is written to allow detection of simultaneous press actions on several key buttons.  More information in [http://www.ti.com/product/tps65950 TPS65950] datasheets. TPS65950 send via I2C1 all the interrupt request.  {| cellspacing="1" cellpadding="1" border="1" style="width: 900px; height: 216px;"|-IGEP| *Can handle up to 8 x 8 keypads, IGEPv2 can handle up to 4 x 4 keypads. *Optionally, you can decode via Omap software. *Event detection on key press and key release. *Multikey press detection, can detect up 2&nbsp; keys at the same time.0020*Long-001key detection on prolonged key press.23*Programmable time-out on permanent key press or after keypad release.HW_RC | [[Image:Igep keypad.pdf IGEP0020 Hardware Reference Manualpng]]|} {| cellspacing="1" cellpadding="1" border="1" style="width: 900px; height: 101px;"|-| bgcolor="#000000" |<font color="white">'''Pad '''</font>| bgcolor="#000000" |<font color="white">'''Pad Name '''</font>| bgcolor="#000000" |<font color="white">'''Initial mode '''</font>| bgcolor="#000000" |<font color="white">'''Main utility '''</font>| bgcolor="#000000" |<font color="white">'''Other available peripherals '''</font>| bgcolor="#000000" |<font color="white">'''Share with '''</font>|-| 1 | KPD_CO | KPD_CO | Keypad controler Column 0 | - | -|-| bgcolor="#CCCCCC" |2 | bgcolor="#CCCCCC" |KPD_C1 | bgcolor="#CCCCCC" |KPD_C1 | bgcolor="#CCCCCC" |Keypad controler Column 1 | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-|-| 3 | KPD_C2 | KPD_C2 | Keypad controler Column 2 | - | -|-| bgcolor="#CCCCCC" |4 | bgcolor="#CCCCCC" |KPD_C3 | bgcolor="#CCCCCC" |KPD_C3 | bgcolor="#CCCCCC" |Keypad controler Column 3 | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-|-| 5 | KPD_RO | KPD_RO | Keypad controler Row 0 | - | -|-| bgcolor="#CCCCCC" |6 | bgcolor="#CCCCCC" |KPD_R1 | bgcolor="#CCCCCC" |KPD_R1 | bgcolor="#CCCCCC" |Keypad controler Row 1 | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-|-| 7 | KPD_R2 | KPD_R2 | Keypad controler Row 2 | - | -|-| bgcolor="#CCCCCC" |8 | bgcolor="#CCCCCC" |KPD_R3 | bgcolor="#CCCCCC" |KPD_R3 | bgcolor="#CCCCCC" |Keypad controler Row 3 | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-|} <br>
<br>
 
==== JC30 connector ====
 
These connectors allow the access to the Camera interface signals. Omap has the processing capability to connect RAW image-sensor modules via this connector. <br>
 
{| cellspacing="1" cellpadding="1" border="1" style="width: 900px; height: 104px;"
|-
| stylebgcolor="text-align: center;#000000" | [[Getting Started with IGEP0020 board<font color="white">'''Pad '''</font>| bgcolor="#000000" |<font color="white">'''Pad Name '''</font>| bgcolor="#000000" |<font color="white">'''Initial mode '''</font>| bgcolor="#000000" |<font color="white">'''Main utility '''</font>| bgcolor="#000000" |<font color="white">'''Other available peripherals '''</font>| bgcolor="#000000" |<font color="white">'''Getting started Share with IGEP0020 board Guide''']]</font>
|-
| style1 | CAM_HS | GPIO_94(mode="text4) | -align: center;" rowspan| CAM_HS(mode=0)<br>HW_DBG0(mode="5" | [[Image:Igep0020.jpg|433x289px]])<br> SAFE_MODE(mode=7) | style="text-align: center;" | '''Other IGEP0020 Official resources from ISEE:'''
|-
| stylebgcolor="text#CCCCCC" |2 | bgcolor="#CCCCCC" |CAM_VS | bgcolor="#CCCCCC" |GPIO_95(mode=4) | bgcolor="#CCCCCC" |-align: center;| bgcolor="#CCCCCC" | Software ToolsCAM_VS(mode=0)<br>HW_DBG1(mode=5)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-
|-
| style3 | CAM_XCLKA | CAM_XCLKA(mode=0) | Camera interface | GPIO_96(mode=4)<br>SAFE_MODE(mode="text7) | -align: center;" | Datasheet
|-
| stylebgcolor="text#CCCCCC" |4 | bgcolor="#CCCCCC" |GND | bgcolor="#CCCCCC" |-align: center;| bgcolor=" #CCCCCC" |GND | Pinout<br>bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-
|-
| style5 | CAM_PCLK | CAM_PCLK(mode=0) | Camera interface | GPIO_97(mode=4)<br>HW_DBG2(mode=5)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |6 | bgcolor="#CCCCCC" |GND | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |GND | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-|-| 7 | CAM_DO | GPIO_99(mode=4) | - | CAM_DO(mode=0)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |8 | bgcolor="#CCCCCC" |CAM_FLD | bgcolor="#CCCCCC" |GPIO_98(mode=4) | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |CAM_FLD(mode=0)<br>CAM_GLOBAL_RESET(mode=2)<br>HW_DBG3(mode=5)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 9 | CAM_D2 | CAM_D2(mode=0) | Camera interface | GPIO_101(mode=4)<br>HW_DBG4(mode=5)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |10 | bgcolor="#CCCCCC" |CAM_D1 | bgcolor="#CCCCCC" |GPIO_100(mode=4) | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |CAM_D1(mode=0)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 11 | CAM_D4 | CAM_D4(mode=0) | Camera interface | GPIO_103(mode=4)<br>HW_DBG6(mode=5)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |12 | bgcolor="#CCCCCC" |CAM_D3 | bgcolor="#CCCCCC" |CAM_D3(mode=0) | bgcolor="#CCCCCC" |Camera interface | bgcolor="#CCCCCC" |GPIO_102(mode=4)<br>HW_DBG5(mode=5)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 13 | CAM_D6 | GPIO_105(mode=4) | - | CAM-D6(mode=0)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |14 | bgcolor="#CCCCCC" |CAM_D5 | bgcolor="#CCCCCC" |CAM_D5(mode=0) | bgcolor="#CCCCCC" |Camera interface | bgcolor="#CCCCCC" |GPIO_104(mode=4)<br>HW_DBG7(mode=5)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 15 | CAM_D8 | GPIO_107(mode=4) | - | CAM_D8(mode=0)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |16 | bgcolor="#CCCCCC" |CAM_D7 | bgcolor="#CCCCCC" |GPIO_106(mode=4) | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |CAM_D7(mode=0)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 17 | CAM_D10 | CAM_D10(mode=0) | Camera interface | GPIO_109(mode=4)<br>HW_DBG8(mode=5)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |18 | bgcolor="#CCCCCC" |CAM_D9 | bgcolor="#CCCCCC" |GPIO_108(mode=4) | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |CAM_D9(mode=0)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 19 | CAM_XCLKB | CAM_XCLKB(mode=0) | Camera interface | GPIO_111(mode=4)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |20 | bgcolor="#CCCCCC" |CAM_D11 | bgcolor="text#CCCCCC" |CAM_D11(mode=0) | bgcolor="#CCCCCC" |Camera interface | bgcolor="#CCCCCC" |GPIO_110(mode=4)<br>HW_DBG9(mode=5)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-align: center;|-| 21 | GPIO_112/I2C2_SCL | GPIO_112(RC11) | - | I2C2_SCL(RC13)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |22 | bgcolor=" #CCCCCC" |GPIO_113/I2C2_SDA | Schematicsbgcolor="#CCCCCC" |GPIO_113(RC12) | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |I2C2_SDA(RC14)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 23 | CAM_RESET | GPIO_114(mode=4) | <br> | SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |24 | bgcolor="#CCCCCC" |CAM_PDN | bgcolor="#CCCCCC" |GPIO_115(mode=4) | bgcolor="#CCCCCC" |<br> | bgcolor="#CCCCCC" |SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 25 | CAM_STROBE | CAM_STROBE(mode=0) | Camera interface | GPIO_126(mode=4)<br>HW_DBG11(mode=5)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |26 | bgcolor="#CCCCCC" |CAM_WEN | bgcolor="#CCCCCC" |GPIO_167(mode=4) | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |CAM_WEN(mode=0)<br>CAM_SHUTTER(mode=2)<br>HW_DBG10(mode=5)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 27 | 3V3 | - | Power 3V3 | - | -|-| bgcolor="#CCCCCC" |28 | bgcolor="#CCCCCC" |3V3 | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |Power 3V3 | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-
|}
<br>
 ==== TFT CONNECTORS: JA41-JA42 ==== These connectors allow the access to the LCD signals.The output signal is shared by HDMI-A  ===== JA41 connector ===== JA41 is used for DVI (Digital Video Interface) data part.  IGEPv2 RB version:  *Available only the first 20 pads IGEPv2 RC version:  *Available only the first 28 pads IGEPv2 RG version: *Available all 30 pads {| cellspacing="1" cellpadding="1" border="1" align="JUSTIFY" style="width: 900px; height: 1064px;"|-| bgcolor="#000000" |<font color="white">'''Pad '''</font>| bgcolor="#000000" |<font color="white">'''Pad Name '''</font>| bgcolor="#000000" |<font color="white">'''Initial mode '''</font>| bgcolor="#000000" |<font color="white">'''Main utility '''</font>| bgcolor="#000000" |<font color="white">'''Other available peripherals '''</font>| bgcolor="#000000" |<font color="white">'''Share with'''</font>|-| 1 | VIO 3V3 | - | Power 3v3 | - | -|-| bgcolor="#CCCCCC" |2 | bgcolor="#CCCCCC" |GND | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |GND | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-|-| 3 | DVI_DATA0 | DSS_D0(mode=0) | LCD&nbsp;pixel data bit | UART1_CTS(mode=2)<br><font color="red">DSSVENC656_DATA0(mode=3)</font><br>GPIO_70(mode=4)<br>SAFE_MODE(mode=7)  | TFP410|-| bgcolor="#CCCCCC" |4 | bgcolor="#CCCCCC" |DVI_DATA1 | bgcolor="#CCCCCC" |DSS_D1(mode=0) | bgcolor="#CCCCCC" |LCD&nbsp;pixel data bit | bgcolor="#CCCCCC" |UART1_RTS(mode=2)<br><font color="red">DSSVENC656_DATA1(mode=3)</font><br>GPIO_71(mode=4)<br>SAFE_MODE(mode=7)  | bgcolor="#CCCCCC" |TFP410|-| 5 | DVI_DATA2 | DSS_D2(mode=0) | LCD&nbsp;pixel data bit | <font color="red">DSSVENC656_DATA2(mode=3)</font><br>GPIO_72(mode=4)<br>SAFE_MODE(mode=7) | TFP410|-| bgcolor="#CCCCCC" |6 | bgcolor="#CCCCCC" |DVI_DATA3 | bgcolor="#CCCCCC" |DSS_D3(mode=0) | bgcolor="#CCCCCC" |LCD&nbsp;pixel data bit | bgcolor="#CCCCCC" |<font color="red">DSSVENC656_DATA3(mode=3)</font><br>GPIO_73(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |TFP410|-| 7 | DVI_DATA4 | DSS_D4(mode=0) | LCD&nbsp;pixel data bit | <font color="red">DSSVENC656_DATA4(mode=3)</font><br>UART3_RX(mode=2)<br>GPIO_74(mode=4)<br>SAFE_MODE(mode=7)  | TFP410|-| bgcolor="#CCCCCC" |8 | bgcolor="#CCCCCC" |DVI_DATA5 | bgcolor="#CCCCCC" |DSS_D5(mode=0) | bgcolor="#CCCCCC" |LCD&nbsp;pixel data bit | bgcolor="#CCCCCC" |<font color="red">DSSVENC656_DATA5(mode=3)</font><br>UART3_TX(mode=2)<br>GPIO_75(mode=4)<br>SAFE_MODE(mode=7)  | bgcolor="#CCCCCC" |TFP410|-| 9 | DVI_DATA6 | DSS_D6(mode=0) | LCD&nbsp;pixel data bit | <font color="red">DSSVENC656_DATA6(mode=3)</font><br>UART1_TX(mode=2)<br>GPIO_76(mode=4)<br>HW_DBG14(mode=5)<br>SAFE_MODE(mode=7)  | TFP410|-| bgcolor="#CCCCCC" |10 | bgcolor="#CCCCCC" |DVI_DATA7 | bgcolor="#CCCCCC" |DSS_D7(mode=0) | bgcolor="#CCCCCC" |LCD&nbsp;pixel data bit | bgcolor="#CCCCCC" |<font color="red">DSSVENC656_DATA7(mode=3)</font><br>UART1_RX(mode=2)<br>GPIO_77(mode=4)<br>HW_DBG15(mode=5)<br>SAFE_MODE(mode=7)  | bgcolor="#CCCCCC" |TFP410|-| 11 | DVI_DATA8 | DSS_D8(mode=0) | LCD&nbsp;pixel data bit | GPIO_78(mode=4)<br>HW_DBG16(mode=5)<br>SAFE_MODE(mode=7) | TFP410|-| bgcolor="#CCCCCC" |12 | bgcolor="#CCCCCC" |DVI_DATA9 | bgcolor="#CCCCCC" |DSS_D9(mode=0) | bgcolor="#CCCCCC" |LCD&nbsp;pixel data bit | bgcolor="#CCCCCC" |GPIO_79(mode=4)<br>HW_DBG17(mode=5)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |TFP410|-| 13 | DVI_DATA10 | DSS_D10(mode=0) | LCD&nbsp;pixel data bit | GPIO_80(mode=4)<br>SAFE_MODE(mode=7) | TFP410|-| bgcolor="#CCCCCC" |14 | bgcolor="#CCCCCC" |DVI_DATA11 | bgcolor="#CCCCCC" |DSS_D11(mode=0) | bgcolor="#CCCCCC" |LCD&nbsp;pixel data bit | bgcolor="#CCCCCC" |GPIO_81(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |TFP410|-| 15 | DVI_DATA12 | DSS_D12(mode=0) | LCD&nbsp;pixel data bit | GPIO_82(mode=4)<br>SAFE_MODE(mode=7) | TFP410|-| bgcolor="#CCCCCC" |16 | bgcolor="#CCCCCC" |DVI_DATA13 | bgcolor="#CCCCCC" |DSS_D13(mode=0) | bgcolor="#CCCCCC" |LCD&nbsp;pixel data bit | bgcolor="#CCCCCC" |GPIO_83(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |TFP410|-| 17 | DVI_DATA14 | DSS_D14(mode=0) | LCD&nbsp;pixel data bit | GPIO_84(mode=4)<br>SAFE_MODE(mode=7) | TFP410|-| bgcolor="#CCCCCC" |18 | bgcolor="#CCCCCC" |DVI_DATA15 | bgcolor="#CCCCCC" |DSS_D15(mode=0) | bgcolor="#CCCCCC" |LCD&nbsp;pixel data bit | bgcolor="#CCCCCC" |GPIO_85(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |TFP410|-| 19 | DVI_DATA16 | DSS_D16(mode=0) | LCD&nbsp;pixel data bit | GPIO_86(mode=4)<br>SAFE_MODE(mode=7) | TFP410|-| bgcolor="#CCCCCC" |20 | bgcolor="#CCCCCC" |DVI_DATA17 | bgcolor="#CCCCCC" |DSS_D17(mode=0) | bgcolor="#CCCCCC" |LCD&nbsp;pixel data bit | bgcolor="#CCCCCC" |GPIO_87(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |TFP410|-| 21 | DVI_DATA18 | DSS_D18(mode=0) | LCD&nbsp;pixel data bit | DSS_D0 (mode=3)<br>MCSPI3_CLK(mode=2)<br>GPIO_88(mode=4)<br>SAFE_MODE(mode=7)  | TFP410|-| bgcolor="#CCCCCC" |22 | bgcolor="#CCCCCC" |DVI_DATA19 | bgcolor="#CCCCCC" |DSS_D19(mode=0) | bgcolor="#CCCCCC" |LCD&nbsp;pixel data bit | bgcolor="#CCCCCC" |DSS_1 (mode=3)<br>MCSPI3_SIMO(mode=2)<br>GPIO_89(mode=4)<br>SAFE_MODE(mode=7)  | bgcolor="#CCCCCC" |TFP410|-| 23 | DVI_DATA20 | DSS_D20(mode=0) | LCD&nbsp;pixel data bit | DSS_D2 (mode=3)<br>MCSPI3_SOMI(mode=2)<br>GPIO_90(mode=4)<br>SAFE_MODE(mode=7)  | TFP410|-| bgcolor="#CCCCCC" |24 | bgcolor="#CCCCCC" |DVI_DATA21 | bgcolor="#CCCCCC" |DSS_D21(mode=0) | bgcolor="#CCCCCC" |LCD&nbsp;pixel data bit | bgcolor="#CCCCCC" |DSS_D3 (mode=3)<br>MCSPI3_CSO(mode=2)<br>GPIO_91(mode=4)<br>SAFE_MODE(mode=7)  | bgcolor="#CCCCCC" |TFP410|-| 25 | DVI_DATA22 | DSS_D22(mode=0) | LCD&nbsp;pixel data bit | DSS_D4 (mode=3)<br>MCSPI3_CS1(mode=2)<br>GPIO_92(mode=4)<br>SAFE_MODE(mode=7)  | TFP410|-| bgcolor="#CCCCCC" |26 | bgcolor="#CCCCCC" |DVI_DATA23 | bgcolor="#CCCCCC" |DSS_D23(mode=0) | bgcolor="#CCCCCC" |LCD&nbsp;pixel data bit | bgcolor="#CCCCCC" |DSS_D5(mode=3)<br>GPIO_93(mode=4)<br>SAFE_MODE(mode=7)  | bgcolor="#CCCCCC" |TFP410|-| 27 | I2C3_SCL | I2C3_SCL(mode=0) | I2C3 Clock | GPIO_184(mode=4)<br>SAFE_MODE(mode=7) | TXS0102DCUR|-| bgcolor="#CCCCCC" |28 | bgcolor="#CCCCCC" |I2C3_SDA | bgcolor="#CCCCCC" |I2C3_SDA(mode=0) | bgcolor="#CCCCCC" |I2C3 Data | bgcolor="#CCCCCC" |GPIO_185(mode=4)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |TXS0102DCUR |-| 29 | GPMC_NCS7| GPT8_PWM_EVT(mode=3) | PWM signal | GPMC_NCS7(mode=0)<br>GPMC_IO_DIR(mode=1)<br>MCBSP4_FSX(mode=2)<br>GPIO_58(mode=4)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |30 | bgcolor="#CCCCCC" |MCSPI1_CS3 | bgcolor="#CCCCCC" |MCSPI1_CS3(mode=0) | bgcolor="#CCCCCC" |SPI1 Chip select 3 | bgcolor="#CCCCCC" |HSUSB2_TLL_DATA2(mode=2)<br>HSUSB2_DATA2(mode=3)<br>GPIO_177(mode=4)<br>MM2_TXDAT(mode=5)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |LBEP5CLWMC|} <br> TFP410: converts DVI signal to HDMI  TXS0102DCUR: Increse I2c3 voltage to 5V to read EDID information  LBEP5CLWMC: Wifi and Bluetooth chip on IGEP0020-RG<br> ===== JA42 connector ===== JA42 is used for DVI (Digital Video Interface) control part, TouchScreen control and SPI1.  The current available on the DC_5V rail is limited to the available current that remains from the DC supply that is connected to the DC power jack on the board. Keep in mind that some of that power is needed by the USB Host power rail and if more power is needed for the expansion board, the main DC power supply current capability may need to be increased. All signals are 1.8V except the DVI_PUP which is a 3.3V signal. The 1.8V rail is for level translation only and should not be used to power circuitry on the board. The 3.3V rail also has limited capacity on the power as well. It is suggested that the 5V rail be used to generate the required voltages for an adapter card.   *Note that <b>only IGEPv2 RG version</b> has all 22 pads available. Other boards have only first 20 pads available. <br>  {| cellspacing="1" cellpadding="1" border="1" align="JUSTIFY" style="width: 900px; height: 343px;"|-| bgcolor="#000000" |<font color="white">'''Pad '''</font>| bgcolor="#000000" |<font color="white">'''Pad Name '''</font>| bgcolor="#000000" |<font color="white">'''Initial mode '''</font>| bgcolor="#000000" |<font color="white">'''Main utility '''</font>| bgcolor="#000000" |<font color="white">'''Other available peripherals '''</font>| bgcolor="#000000" |<font color="white">'''Share with'''</font>|-| 1 | VIO 1V8 | - | Power 1v8 | - | -|-| bgcolor="#CCCCCC" |2 | bgcolor="#CCCCCC" |SYS_BOOT5 | bgcolor="#CCCCCC" |GPIO_7(mode=4) | bgcolor="#CCCCCC" |Omap boot config | bgcolor="#CCCCCC" |SYS_BOOT5(mode=0)<br>MMC2_DIR_DAT3(mode=1)<br><font color="blue">DSS_DATA22(mode=3)</font><br>SAFE_MODE(mode=7)  | bgcolor="#CCCCCC" |-|-| 3 | DC_5V | - | Power 5v | - | -|-| bgcolor="#CCCCCC" |4 | bgcolor="#CCCCCC" |GND | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |GND | bgcolor="#CCCCCC" |- | bgcolor="#CCCCCC" |-|-| 5 | SYS_BOOT0 | GPIO_2(mode=4) | Omap boot config | SYS_BOOT0(mode=0)<br><font color="blue">DSS_DATA18(mode=3)</font><br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |6 | bgcolor="#CCCCCC" |SYS_BOOT1 | bgcolor="#CCCCCC" |GPIO_3(mode=4) | bgcolor="#CCCCCC" |Omap boot config | bgcolor="#CCCCCC" |SYS_BOOT1(mode=0)<br><font color="blue">DSS_DATA19(mode=3)</font><br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 7 | DVI_VSYNC | DSS_VSYNC(mode=0) | LCD&nbsp;vertical sync (Expansion) | GPIO_68(mode=4)<br>SAFE_MODE(mode=7) | TFP410|-| bgcolor="#CCCCCC" |8 | bgcolor="#CCCCCC" |DVI_HSYNC | bgcolor="#CCCCCC" |DSS_HSYNC(mode=0) | bgcolor="#CCCCCC" |LCD Horitzontal sync (Expansion) | bgcolor="#CCCCCC" |GPIO_67 (mode=4)<br>HW_DBG13(mode=5)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |TFP410|-| 9 | DVI_ACBIAS | DSS_ACBIAS(mode=0) | LCD Control (Expansion) | GPIO_69(mode=4)<br>SAFE_MODE(mode=7) | TFP410|-| bgcolor="#CCCCCC" |10 | bgcolor="#CCCCCC" |DVI_PUP | bgcolor="#CCCCCC" |GPIO_170(mode=4) | bgcolor="#CCCCCC" |Control signal for DVI controller (Expansion) | bgcolor="#CCCCCC" |HDQ_SIO(mode=0)<br>SYS_ALTCLK(mode=1)<br>I2C2_SCCBE(mode=2)<br>I2C3_SCCBE(mode=3)<br>SAFE_MODE(mode=7)  | bgcolor="#CCCCCC" |TFP410|-| 11 | DVI_PCLK | DSS_PCLK(mode=0) | LCD clock (Expansion) | GPIO_66(mode=4)<br>HW_DBG12(mode=5)<br>SAFE_MODE(mode=7) | TFP410|-| bgcolor="#CCCCCC" |12 | bgcolor="#CCCCCC" |TS_nPEN_IRQ | bgcolor="#CCCCCC" |GPIO_175(mode=4) | bgcolor="#CCCCCC" |Touchscreen control (Expansion) | bgcolor="#CCCCCC" |McSPI1_CS1(mode=0)<br>MMC3_CMD(mode=3)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 13 | LCD_QVGA/nVGA | GPIO_154(mode=4) | Touchscreen control (Expansion) | McBSP4_DX(mode=0)<br><font color="red">HSUSB3_TLL_DATA2(mode=5)</font><br>MM3_TXDAT(mode=6)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |14 | bgcolor="#CCCCCC" |LCD_ENVDD | bgcolor="#CCCCCC" |GPIO_153(mode=4) | bgcolor="#CCCCCC" |Touchscreen control (Expansion) | bgcolor="#CCCCCC" |McBSP4_DR(mode=0)<br><font color="red">HSUSB3_TLL_DATA0(mode=5)</font><br>MM3_RXRCV(mode=6)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 15 | LCD_RESB | GPIO_155(mode=4) | Touchscreen control (Expansion) | McBSP4_FSX(mode=0)<br><font color="red">HSUSB3_TLL_DATA3(mode=5)</font><br>MM3_TXEN_N(mode=6)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |16 | bgcolor="#CCCCCC" |LCD_INI | bgcolor="#CCCCCC" |GPIO_152(mode=4) | bgcolor="#CCCCCC" |Touchscreen control (Expansion) | bgcolor="#CCCCCC" |McBSP4_CLKX(mode=0)<br><font color="red">HSUSB3_TLL_DATA1(mode=5)</font><br>MM3_TXSE0(mode=6)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |-|-| 17 | MCSPI1_CLK | McSPI1_CLK(mode=0) | Touchscreen control (Expansion) | MMC2_DAT4(mode=1)<br>GPIO_171(mode=4)<br>SAFE_MODE(mode=7)  | -|-| bgcolor="#CCCCCC" |18 | bgcolor="#CCCCCC" |MCSPI1_SIMO | bgcolor="#CCCCCC" |McSPI1_SIMO(mode=0) | bgcolor="#CCCCCC" |Touchscreen control (Expansion) | bgcolor="#CCCCCC" |MMC2_DAT5(mode=1)<br>GPIO_172(mode=4)<br>SAFE_MODE(mode=7)  | bgcolor="#CCCCCC" |-|-| 19 | MCSPI1_CS0 | McSPI1_CS0(mode=0) | Touchscreen control (Expansion) | MMC2_DAT7(mode=1)<br>GPIO_174(mode=4)<br>SAFE_MODE(mode=7)  | -|-| bgcolor="#CCCCCC" |20 | bgcolor="#CCCCCC" |MCSPI1_SOMI | bgcolor="#CCCCCC" |McSPI1_SOMI(mode=0) | bgcolor="#CCCCCC" |Touchscreen control (Expansion) | bgcolor="#CCCCCC" |MMC2_DAT6(mode=1)<br>GPIO_173(mode=4)<br>SAFE_MODE(mode=7)  | bgcolor="#CCCCCC" |-|-| 21 | GPMC_NCS7| GPT8_PWM_EVT(mode=3) | PWM signal | GPMC_NCS7(mode=0)<br>GPMC_IO_DIR(mode=1)<br>MCBSP4_FSX(mode=2)<br>GPIO_58(mode=4)<br>SAFE_MODE(mode=7) | -|-| bgcolor="#CCCCCC" |22 | bgcolor="#CCCCCC" |MCSPI1_CS3 | bgcolor="#CCCCCC" |MCSPI1_CS3(mode=0) | bgcolor="#CCCCCC" |SPI1 Chip select 3 | bgcolor="#CCCCCC" |HSUSB2_TLL_DATA2(mode=2)<br>HSUSB2_DATA2(mode=3)<br>GPIO_177(mode=4)<br>MM2_TXDAT(mode=5)<br>SAFE_MODE(mode=7) | bgcolor="#CCCCCC" |LBEP5CLWMC|} TFP410: converts DVI signal to HDMI  LBEP5CLWMC: Wifi and Bluetooth chip on IGEP0020-RG<br> <section end=IGEP0020 expansion connectors /> [[Category:IGEPv2 PlatformIGEP Processor Boards]]
Retrieved from "http://labs.isee.biz/index.php?title=Special:MobileDiff/2085...10469"