1,381
edits
Changes
→Download from git repository
= Summary<br><br> =X-Loader, an initial program loader for Embedded boards based on OMAP processors.
= Why =Security==This is one of the most important reasons why we develop this new IGEPX-Xloader =loader. you will Probably know that flash devices get new bad memory blocks with normal usage that can make unusable or can damange the software residing inside the flash (ex: upgrading the software, copying a new kernel ... ), in these cases your board won't be usable anymore if you don't use a right nand filesystem that insures data integrity. Using the old schema we've 4 important partitions on flash without any protection, x-loader, u-boot, u-boot enviroment and kernel.
== Security Maintenance==With the old schema 3 different software existed (x-loader, u-boot, kernel) that did exactly the same job, so you had to reconfigure the board, increasing the complexity of maintenance for the board system and provide a major bug source because we had to assure that all software was aligned with all changes. Also, from a second point of view, we did the job three times so the boot process was more complex and slow.
=Features and Limitations= Mantenience ==Improvements & Modifications==* Added malloc/free functionality.* Added mtd framework and onenand support, removed the old onenand drivers.* Added fs jffs2 support using mtd & onenand support (Read Only).* Added crc32 and zlib.* Jffs2 zlib compression support (Read Only).* Dual boot mmc & onenand with mmc highest priority.* Added Linux kernel boot directly (Support for 2.6.22 and highest version kernels)* Linux kernel supported images: vmlinuz, bzImage and zImage.* Support for loading Linux Ram disk (EXPERIMENTAL)* Added "ini" files parser.* The configuration resides in a plain txt (ini format file).* Support Windows & Linux formating ini files.* boot from mmc, onenand, or mix with mmc highest priority.* Added codeblocks project and compilation rules.* Added support for vfat32 extra names.* Configure TPS65950 voltage to 1.35V if it's used a DM3730 processor.* Added new parameter MachineID in kernel tag file, with it you can* - configure the kernel board ID setup* Added new parameter buddy for kernels 2.6.35.y and 2.6.37.y* Optimize some LPDDR Memory configuration values* Removed some OneNand Debug information* Removed some FAT incorrect warnings* Added Support Initial Ram disk* Reconfigure Makefile options* Support Kernels 2.6.35, 2.6.37, 3.6.4* Added support for boot ARM binary files (such u-boot or QNX kernel)* Support for Numonyx, Micron and hynix POP Memories.* Memory autodetection.* Added GPTimer functionality.* Support Numonyx, Micron and hynix memories.* DMA Copy support* Omtimized memcpy and memset functions.* DSS Video driver.* Support ISEE toolchain yocto 1.2 based.
== Easy to use TODO==* Remove compilation warnings.* System Rescue.* Improve boot selection and priority.* Remove unused code.
== Upgrade faster and easy VERSION CHANGES==[2.1.0-1] This version only can be build with gcc linaro 4.5.2 other compilers be not supported.
[2.12.0-1] This version only can be build with gcc linaro 4.5.2 other compilers be not supported.<br> Update Makefile structure
[2.12.0-1] Removed some uncontrolled "printf" with incorrect information.<br> Downgrade the boot processor speed
[2.13.0-1] Added Support for TPS65950-A3 initialization at 1.35V<br> Add NAND flash devices and Micron MT29CXGXXMAXX memories support
[2.13.0-12] Added Add Hynix NAND memorie and IGEP0032 support for IGEP Module 0030<br>
[2.13.0-12] Added support dynamic Machine ID selection (same xloader boot IGEPv2 & IGEP Module)<br> lzo compression schema.
----
[2.13.0-3] Add Support for execute ARM binaries [2.3.0-3] ARM Compilation bug resolved<br> Bug Fixes related to I and D Cache
----
[2.14.0-31] Update SDRAM structure initialization<br> Added Memory test feature
[2.14.0-31] Added support for Initial RAM disk<br> some boot information
[2.14.0-31] Updated Initial RAM disk destination address New read_nand_cache function optimized for load from NAND
[2.4.0----1] BUG resolved: Refresh Setup in Micron & Hynix Memories
[2.24.0-1] Update Makefile structure BUG resolved: Reset Memory controller after initialize Malloc function
[2.24.0-1] Downgrade BUG resolved: Resolve problems updating the boot processor speed<br> flash content under jffs2
----
[2.34.0-12] Add NAND flash devices and Micron MT29CXGXXMAXX memories support Resolved Memory Autodetection
[2.34.0-2] Add Hynix NAND memorie and IGEP0032 support Better hang board led control
[2.34.0-2] Added lzo compression schema. New read_nand_cache function optimized for load from OneNand
----
[2.45.0-1] Added Memory test feature System DMA driver.
[2.45.0-1] Added some boot information optimized memcpy & memset functions.
[2.45.0-1] New read_nand_cache function optimized for load from NAND Improved boot speed.
[2.45.0-1] BUG resolved: Refresh Setup in Micron & Hynix Memories Improve NAND driver support.
[2.45.0-1] BUG resolved: Reset Memory controller after initialize Malloc function Auto x-loader.bin.ift and MLO generation.
[2.45.0-1] BUG resolved: Resolve problems updating the flash content under jffs2 Added DSS video support.
----
[2.45.0-2] Resolved Memory Autodetection Fixed System DMA misconfiguration.
[2.45.0-2] Better hang board led control Improve GPMC timming setup.
[2.45.0-2] New read_nand_cache function optimized for load from OneNand Added DSS igep.ini variables.
[2.45.0-2] Added Hw GPtimer functionality<br> Support for new memory capacities.
[2.5.0-2] Auto x---loader.bin.ift and MLO generation.
[2.5.0-12] Added System DMA driverMinor bug fixes.
[2.5.0-13] Improved platform.S: downgrade MPU boot speed. [2.5.0-1] Improve NAND driver support. [2.5.0-1] Auto x-loader.bin.ift and MLO generation. [2.5.0-1] Added DSS video support.<br> clock from 1GHz to 800 MHz
----
[2.56.0-21] Fixed System DMA misconfiguration. Remove OMAP35xx support
[2.56.0-21] Improve GPMC timming setup. New DMA driver, now can handle different DMA channels and transfers
[2.56.0-21] Added DSS igep.ini variables. GPMC: Add support for use prefetch engine
[2.56.0-21] NAND: Added Support for a new memory capacities. Nand driver
[2.56.0-21] Auto x-loader.bin.ift and MLO generation. NAND: Modify memory setup timmings
=Pre-Compiled Binaries={| border="1" width="905" cellspacing="1" cellpadding="1" width|-! scope="905col" border|Release! scope="1col" style|Download link! scope="col"|Support
|-
|-
|| 2.45.0-2 || [http://downloads.isee.biz/pub/releases/IGEP_xloader/igep-x-loader-2.45.0-2.tar.bz2 igep-x-loader-2.45.0-2.tar.bz2] ||[[The_IGEP_X-loader#STATUS | All OMAP3 Boards]]
|-
|| 2.14.0-2 || [http://downloads.isee.biz/pub/releases/IGEP_xloader/igep-x-loader-2.14.0-2.tar.bz2 igep-x-loader-2.14.0-2.tar.bz2] ||[[The_IGEP_X-loader#STATUS | All OMAP3 Boards]] except IGEP COM MODULE AM3703
|-
|| 2.1.0-3 2|| [http://downloads.isee.biz/pub/releases/IGEP_xloader/igep-x-loader-2.1.0-32.tar.bz2 igep-x-loader-2.1.0-32.tar.bz2] ||[[The_IGEP_X-loader#STATUS | All OMAP3 Boards]] except IGEP COM MODULE AM3703
|-
|| 2.1.0-3||[http://downloads.isee.biz/pub/releases/IGEP_xloader/igep-x-loader-2.1.0-3.tar.bz2 igep-x-loader-2.1 .0-3.tar.bz2]||[[The_IGEP_X-loader#STATUS | All OMAP3 Boards]] except IGEP COM MODULE AM3703|-||2.2.0-1|| [http://downloads.isee.biz/pub/releases/IGEP_xloader/igep-x-loader-2.2.0-1.tar.bz2 igep-x-loader-2.2.0-1.tar.bz2] ||[[The_IGEP_X-loader#STATUS | All OMAP3 Boards]] except IGEP COM MODULE AM3703
|}
= Build Procedure<br> ===Build with ISEE SDK Yocto Toolchain 1.2=====Download and Install the cross compiler if you not do it before.===Download the toolchain from this [https://www.isee.biz/support/downloads/item/igep-sdk-yocto-toolchain-1-2-2-3 link] and uncompress it as root in your / directory.
<pre>Hint: Remember setup the enviroment before build the source:
source /opt/poky/1.2/environment-setup-armv7a-vfp-neon-poky-linux-gnueabi</pre>
=== Download the sources from our git repository ===<pre>$ git clone git://git.isee.biz/pub/scm/igep-x-loader.git</pre> === Get your desired tag / release ===git checkout <your_desired_release> -b <your_name_release>
</pre>
=== Setup the board build setup<br> ===<pre>make igep00x0_config</pre> === Build the software<br> ===<pre>make</pre> === Sign the binary x-loader (Only versions prior to 2.5.0-x)<br> ===''You should execute contrib/signGP for sign the xloader.''
<pre>contrib/signGP x-load.bin
The signed x-loader it's named: x-load.bin.ift
</pre>
== Build Native =====Download from git repository=== git clone https://git.isee.biz/arm-boot/igep-x-loader.git git checkout <your_desired_release> -b <your_name_release>
</pre>
=== Configure the board settings ===<pre>make igep00x0_config</pre><pre>Edit the variable CFLAGS and add the option: -fno-stack-protectorCFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes -fno-stack-protector</pre> === Build<br> ===<pre>make CROSS_COMPILE=arm-none-linux-gnueabi-</pre> === Sign the binary x-loader ===''You should execute contrib/signGP for sign the xloader.''
<pre>contrib/signGP x-load.bin
The signed x-loader it's named: x-load.bin.ift
</pre> = BOOT<br> =The IGEP X-Loader must reside in the microSD card or in the Nand Memory.
=== Prepare Copy the microsd card files in the first (FAT) partition===In the first partition you must copy in this order:
<pre> 48 /* Linux Images */
49 const char* LinuxImageNames [] = {
or you can set the name for your kernel in the configuration file using the tag: kImageName
</pre> Don't use a uImage kernel format (from uboot), only standard kernel formats be supported.
'''kernel build command example''': <pre>$make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- zImage modules</pre> === Second Partition ===
Example: <pre>sudo make ARCH=arm CROSS_COMPILE=arm-poky-linux-gnueabi- modules_install INSTALL_MOD_PATH=[path to your target rootfs]</pre> ==Nand Boot===== Nand Partitions<br> ===We've defined 3 partitions on the Nand Memory.
<pre>MTD partitions on "omap2-onenand":
(a) 0x000000000000-0x000000080000 : "X-Loader"
(b) 0x000000080000-0x000000c80000 : "Boot"
(c) 0x000000c80000-0x000020000000 : "File System"
</pre> ==== X-Loader Partition ====* Not fs formated (onenand raw)* Size: 0x80000 (512 KiB)* The xloader must be signed before copy it into the flash memory.
<pre>Suggested procedure:
Erase and copy the x-loader into the first flash partition (mtd0):
<pre>Suggested procedure:
Erase all mtd1 content:
Create your partition:
<u></u>You can mount the partition over your boot directory in the rootfs <pre>$mount -t jffs2 /dev/mtdblock1 /boot</pre> You can use the cp command for copy your kernel and igep.ini configuration file. <pre>$cp igep.ini /boot$cp zImage /boot</pre> ==== Rootfs Partition ====
<pre>cp igep.ini /bootcp zImage /boot</pre>== Boot Priority ==Rootfs Partition====* fs (your prefered fs supported by linux, maybe a good choice it should be ubifs)* Size, all or you can create more partitions if you wish ... :)
==Boot Priority==XLoader first try load from mmc and if it fails then try from OneNand.<br>
'''MLO (x-loader), igep.ini, zImage from MMC'''<br/>If all it's present in the mmc it don't try to boot from Onenand.<br>
'''MLO (x-loader) in MMC, igep.ini and zImage in Onenand.'''<br/>If only MLO it's provided this one try to load the other information from the Onenand.
It means that XLoader always try to load the information from MMC and if it fails then try to load from OneNand.
== Configuration file: igep.ini ==[http://en.wikipedia.org/wiki/INI_file This entry in wikipedia] can help you how a ini file it's structured.
Inside the sources/scripts directory you can found a [http://engit.wikipediaisee.orgbiz/?p=pub/wikiscm/INI_file This entry in wikipedia] can help you how igep-x-loader.git;a =blob;f=scripts/igep.ini;h=ce093fe80c81d8888bf79464f847059b312bba83;hb=refs/heads/master igep.ini ] example file it's structured.
[kernelkparams] Used for internal XLoader setuppass the linux kernel parameters.<br>
<pre> 1 [kernel]
2 kaddress=0x80008000
9 MachineID=xxxx Where Machine ID = 2344 for IGEPv2, ID = 2717 for IGEP COM Module, ID = 3203 for IGEP COM PROTON
10 Mode=<kernel> or <binary>
11 dss=<0 or 1> Enable or Disable Video Output 12 dss_color=<0x00FF8000> Write your desired color in hex value 13 dss_bitmap=<filename> Raw display image</pre> {| cellspacingborder="1" cellpaddingwidth="1800" widthcellspacing="8001" bordercellpadding="1"|-||Parameter Name||Description||Default Value||Comments|-||kaddress||Kernel copy address||0x80008000||hex memory address|-||rdaddress||Ram Disk location address||0x81600000||hex memory address
|-
| Parameter Name |serial.low| Description |Serial number (low part)| Default Value |0 - 99999999| Comments|numeric
|-
| kaddress |serial.high| Kernel copy address |Serial number (high part)| 0x80008000 |0 - 99999999| hex memory address|numeric
|-
| rdaddress |revision| Ram Disk location address |Revision ID| 0x81600000 |0 - 9999| hex memory address|numeric
|-
| serial.low |kImageName| Serial number (low part) |Kernel, binary image name| 0 - 99999999 |N/A| numeric|Kernel or binary image name
|-
| serial.high |kRdImageName| Serial number (high part) |Ramdisk| 0 - 99999999 |N/A| numeric|Ram Disk image name
|-
| revision |MachineID| Revision |Machine ID (kernel ID )| 0 - 9999 |2717| numeric|2717 (IGEP COM Module) | 2344 IGEPv2 | 3203 (IGEP COM PROTON)
|-
| kImageName |Mode| Kernel, binary image name |Boot Mode| N/A |kernel| Kernel or |kernel=linux kernel / binary=boot binary image name
|-
| kRdImageName |dss| Ramdisk |Enable Video| N/A |0| Ram Disk image name|0 = Disable, 1 Enable Video Output
|-
| MachineID |dss_color| Machine ID (kernel ID) |Video Color| 2717 |0x00FF8000| 2717 (IGEP COM Module) | 2344 IGEPv2 | 3203 (IGEP COM PROTON)|Solid Color
|-
| Mode |dss_bitmap| Boot Mode |Video Bitmap Image| kernel |string| kernel=linux kernel / binary=boot binary |filename with desired image
|}
=== TAG: [kparams] ===In this tag you can add all kernel parameters that you need, this is only an example:
<pre> 10 [kparams]
11 console=ttyS2,115200n8
Also remember you can comment any line using ';' or '#' characters.
</pre> = FAQ =
=FAQ=== How I can boot from NFS? ==Yes, you should add below parameters in the kparams tag:
<pre>#smsc911x.mac fix your mac address
smsc911x.mac=0xb2,0xb0,0x14,0xb5,0xcd,0xde
root=/dev/nfs
# Set your NFS root path as <server_ip>:<rootfs_path>
nfsroot=192.168.2.105:/srv/nfs/linaro_minimal</pre> == How I can change the assigned kernel memory? ==You can use the mem kernel variable as assign your desired kernel memory as:
<pre>[kparams]
mem=430M</pre> == How I can add more kernel variables? ==You can add more variables creating a new variable - value pair under kparams tag as:
<pre>ubi.mtd=2
root=ubi0:igep0020-rootfs
rootfstype=ubifs</pre> == How I can boot my board using a RAM disk?<br> ==Use a RAMdisk it's fully supported.
<pre>[kernel]
rdaddress=0x81600000
root=/dev/ram0 rw
</pre> == Can I change the Processor frecuency? ==Yes you can, IGEP X-loader configures the processor to boot at 600 Mhz you can select a different boot speed using the variable mpurate as:
==How I can boot downloading the kernel using wget?==The way for do that it's using one minimal kernel and RAMdisk (ex: using image-core-minimal from poky), the procedure can be more or less:
a) Copy your minimal kernel and your Ramdisk inside the boot partition.
b) Boot Normally from this kernel and Ramdisk, create one script your your desired command such wget http://192.168.15.22/mykernel.bin
c) Execute the script when boot (you can do that adding the script to the init enviroment)
d) if the downloading it's ok then execute the kexec call, first load the kernel and then pass to it your desired parameters.
e) finally boot the new kernel with kexec.
==My board not boot and I don't know what to do ...==When you test your IGEP X-loader, igep.ini file and kernel we suggest use a microsd card in front of use directly the flash nand, if your flash not boot copy all files in one microsd card and boot from there. You can check what happens removing some files from your microsd card for example if you wish test if your flashed kernel it's loaded in a right way then remove the kernel from your microsd card (note: use the same kernel name), IGEP X-loader first try load the file from your microsd card but if it's not found then it try to find the file in the flash.<br>
== How I can upgrade my old kernel? ==Just copy the new one, the most secure way it's copy the new one and at end replace the igep.ini file with your new one.
= 6 Contribution & Support & Bugs Report =Contributions to this project be welcome and you can send your patches to support@iseebcn.com or you can use the igep forum for it.<br />You can access to IGEP-x-Loader repository using our git at [http://git.isee.biz/?p=pub/scm/igep-x-loader.git;a=summary git.isee.biz]<br />IGEP IRC Channel: [http://webchat.freenode.net/?channels=igep http://webchat.freenode.net/?channels=igep]
[[Category:Boot_loaders|X_Loader]]