4,199
edits
Changes
m
→IGEP COM PROTON Board
''' Basic '''
Log into IGEP COM MODULE PROTON (for example via SSH, as shown in the previous chapter), and run the following commands to turn LED's on:
<pre>echo 1 > /sys/devices/platform/leds-gpio/leds/d242\:green/brightness
<pre>$ cat /sys/devices/platform/leds-gpio/leds/d242\:green/trigger
[none] nand-disk mmc0 mmc1 timer heartbeat backlight gpio default-on</pre>
In the example above, we have checked the status of the trigger in led d242:green. Mode 'none' is selected.