4,199
edits
Changes
From IGEP - ISEE Wiki
m
#Read this article about [[How to setup the IDC10 cable|how to setup de IDC10 cable]] between your computer and your IGEP Processor Board.
no edit summary
The simplest way to set up your IGEP board is with a console session, using your laptop or PC as the terminal.
= Read before=Read this article about [[How to setup the IDC10 cable|how to setup de IDC10 cable]] between your computer and your IGEP Processor Board.
= Setting up your serial debug session using putty =
== Overview ==
'''PuTTY''' is an SSH and telnet client, developed originally by Simon Tatham for the Windows platform. PuTTY is open source software that is available with source code and is developed and supported by a group of volunteers. You can download it from: [http://www.putty.org/ www.putty.org]
#Open PuTTy.
#Choose Serial line. If you are running PuTTy on Windows, the Serial line will be like (COM1 or COM2 or COM3, etc.). If you are running PuTTy on Ubuntu, the Serial line will be like (/dev/ttyS0 or /dev/ttyS1 or /dev/ttyS3, etc.). Note that if you are using a USB->Serial converter, the Serial line will be like /dev/ttyUSB0