Difference between revisions of "How to setup the IDC10 cable"
Manel Caro (talk | contribs) |
Davidof1990 (talk | contribs) |
||
(17 intermediate revisions by 6 users not shown) | |||
Line 1: | Line 1: | ||
= How to Prepare the IDC10 to DB9 Cable for use it with a USB232 Serial Conversor on IGEPv2-RC Series = | = How to Prepare the IDC10 to DB9 Cable for use it with a USB232 Serial Conversor on IGEPv2-RC Series = | ||
+ | |||
+ | |||
+ | == Check your DB9-to-Flat Cable == | ||
+ | |||
+ | * CAUTION | ||
+ | The [https://www.isee.biz/store/product/67-igepv2-serial-debug-cable IDC10 to DB9 Cable] looks like a DB9-to-Flat spare Cable from a Personal PC but is different. | ||
+ | |||
+ | If you have a DB9-to-Flat spare Cable from a Personal PC, you have to consider that it has pin-to pin connection and that this doesn't correspond to the IGEP (J960) serial connector. | ||
+ | In this case you have to modify your DB9-to-Flat spare Cable in order to use only pins 2,3,5 | ||
+ | |||
+ | pin DC9 - pin IGEP (J960) | ||
+ | 2 - 2 | ||
+ | 3 - 3 | ||
+ | 5 - 5 | ||
+ | |||
+ | |||
== Necessary Material == | == Necessary Material == | ||
Line 6: | Line 22: | ||
#Cutter. | #Cutter. | ||
#Scissors.<br> | #Scissors.<br> | ||
− | #'''[ | + | #'''[https://www.isee.biz/support/downloads/item/igepv2-hardware-reference-manual-2 IGEPv2 Hardware Reference Manual]'''. |
[[Image:DSC 0164.JPG]] | [[Image:DSC 0164.JPG]] | ||
Line 14: | Line 30: | ||
== Procedure == | == Procedure == | ||
− | The first step it's to separate the wires 5 and 6 for it | + | The first step it's to separate the wires 5 and 6 for it you should start count from the red mark (the red mark it's the first, wire = 1) you should count 5 wires then you should do a cut between wires 5 and 6. |
<br> | <br> | ||
Line 50: | Line 66: | ||
[[Image:DSC 0177.JPG]] | [[Image:DSC 0177.JPG]] | ||
− | <br> | + | <br> |
== Serial Port Setup == | == Serial Port Setup == | ||
− | You can use minicom, putty or several programs for connect to the serial debug port. | + | You can use minicom, putty or several programs for connect to the [[Using serial debug port to communicate|debug serial port]] . |
+ | |||
+ | == Cable Type == | ||
+ | If your terminal not prints out text check the pinouts of your serial cable. In most cases you need a | ||
+ | [http://logmett.com/index.php?/quick-tips/rs232-cable-pinouts.html 'null modem cable']. | ||
+ | |||
+ | [[Category:How to forge]] | ||
+ | [[Category:UART]] |
Latest revision as of 13:50, 1 July 2015
Contents
How to Prepare the IDC10 to DB9 Cable for use it with a USB232 Serial Conversor on IGEPv2-RC Series
Check your DB9-to-Flat Cable
- CAUTION
The IDC10 to DB9 Cable looks like a DB9-to-Flat spare Cable from a Personal PC but is different.
If you have a DB9-to-Flat spare Cable from a Personal PC, you have to consider that it has pin-to pin connection and that this doesn't correspond to the IGEP (J960) serial connector. In this case you have to modify your DB9-to-Flat spare Cable in order to use only pins 2,3,5
pin DC9 - pin IGEP (J960)
2 - 2 3 - 3 5 - 5
Necessary Material
- IDC10 to DB9 Cable.
- Cutter.
- Scissors.
- IGEPv2 Hardware Reference Manual.
Procedure
The first step it's to separate the wires 5 and 6 for it you should start count from the red mark (the red mark it's the first, wire = 1) you should count 5 wires then you should do a cut between wires 5 and 6.
This is the result for the cut between wire 5 and 6.
Now you must cut the unnecessary wires (wires 6 to 10).
And the final result.
Now you're ready for test the result:
Serial Port Setup
You can use minicom, putty or several programs for connect to the debug serial port .
Cable Type
If your terminal not prints out text check the pinouts of your serial cable. In most cases you need a 'null modem cable'.