4,199
edits
Changes
From IGEP - ISEE Wiki
m
{{#lst:How to use Telit Modem|overview}}modem is not supported by default in IGEPv2 Expansion and IGEP Berlin. =Configure == Configure this [[How_do_I_edit_my_kernel_command_line | adding following kernel cmdline parameter]] buddy.modem===yes {{#lst*Power up the modem using the next commands:How <pre>echo 0 > /sys/class/gpio/gpio145/valueecho 1 > /sys/class/gpio/gpio163/valuesleep 1echo 0 > /sys/class/gpio/gpio163/value</pre> *Once the modem is on (led near power button is blinking now), you can interact with it via UART 2. You can use Microcom to comunicate with it from the serial debug console:<pre>microcom -s 115200 /dev/ttyO1</pre> *To check the modem status use Telit Modem|configure}}the command:<br><pre>at</pre> *Answer should be OK.<br> *Now unlock it by inserting your SIM card PIN number. Use the command:<pre>at+cpin=== Power up ===<PIN></pre> *If you correctly inserted the PIN number, the answer should be OK. If you fail more than 3 times, your SIM card will lock and you will have to insert PUK number. {{#lst:How *Now you are ready to use Telit Modem|powerup}}the GSM/GPS modem.<br>
→How to Telit Modem
== How to Telit Modem ==
''(from [[How to use Telit Modem]])''
== How to use to use TVP5151 Video Decoder ==
