0
edits
Changes
From IGEP - ISEE Wiki
→Available peripherals on external connector
Before configure mux is necessary review some things:
- If connector is shared with other peripherals you should disable it via software or hardware.<br> - Don't use the same peripheral in more than one pad.<br>Omap mux have 8 modes, somes modes are disable in some pads.
The next tables show you all the mux capabilities:
<pre>0x00, /* REG_VOICE_IF (0xF) */</pre>
to Code:
<pre>0x04, /* REG_VOICE_IF (0xF) */</pre> '''(3):''' Omap mux have 8 modes, somes modes are disable in some pads.
=== J960 connector ===
|}
<br> '''(6):''' TFP410: Converts DVI signal to HDMI. They share the same video signal.<br>
=== JA41 connector ===
