0
edits
Changes
From IGEP - ISEE Wiki
no edit summary
This page describes how to use the USB device port of the [http://www.igep.es/index.php?option=com_content&view=article&id=109&Itemid=123 ISEE IGEP MODULE] with OMAP3 processor to communicate with the USB port of your computer (or USB hub connected to your computer).
[[Image:IGEP module 01Igep0030.jpg|center|589x201px]] <br>
The on-board HS USB OTG port is used as the default power input for IGEP MODULE standalone operating mode.
Once the board is powered up and running, we will get Ethernet connectivity over the same USB cable (USB Ethernet Gadget/RNDIS driver) or via wireless.
By default, the IGEP MODULE usb interface will have the IP address 192.168.7.2, and the wireless interface comes with WLAN_IGEP as ESSID and 192.168.6.1 as IP address.
== Connect using USB Ethernet Gadget/RNDIS driver ==
auto usb0
iface usb0 inet static
Connect to the board using ssh
To fix the problem edit your ~/.ssh/known_hosts and remove the line corresponding to this host.
[[Category:Remove|IGEP0030]]