Open main menu

Changes

User:Pau pajuelo

21,677 bytes removed, 15:28, 5 September 2014
m
→‎DM3730: Decode an AAC audio file (OK)
= TODO: =
Update peripheral tutorials, finish gpio example program<br>  Categorize new tutorials<br>  Finish tutorials below<br>  Upgrade IGEP Technology Devices Guides  Link all development tools documentation when possible (do a diagram)
How to manage the kernel modules on Linux
How do I edit my kernel command line
Basic Software instructions = Getting started with IGEP PARIS = {{Table/IGEP Technology Devices|Tech_Family={{#lst:Template:Links|IGEP_PARIS_Tech_Family}}|Tech_ID={{#lst:Template:Links|IGEP_PARIS_Tech_ID}}|Name={{#lst:Template:Links|IGEP_PARIS_Name}}|Image={{#lst:Template:Links|IGEP_PARIS_Image}}|ISEE_MainPage={{#lst:Template:Links|IGEP_PARIS_ISEE_MainPage}}|ISEE_Hardware={{#lst:Template:Links|IGEP_PARIS_ISEE_Hardware}}}}  <br> __TOC__ = Overview =This is the 1/3 chapter of IGEP PARIS Expansion Tutorial Guide.  In this first chapter, we will learn how to connect some expansion peripherals. = Requirements = In these tutorials we are going to need the following components:  *[http://isee.biz/products/processor-boards/igep-com-proton IGEP COM PROTON] or [http://isee.biz/products/processor-boards/igep-com-module IGEP COM MODULE].*5V DC power supply with a minimum of 3A current capacity.*[http://shop.isee.biz/buy-online/accesories/tft-24-bits-seiko-7.html Seiko 7"] screen if you need a touch screen. *DB9 connector and USB serial converter to follow serial communication tutorial.*Ethernet cable for network communications.*An USB keyboard and a mouse (optional).*LiAUDIO DSP-on battery with 3V3 (optional).*A PC. = Getting started === TFT and Touchscreen ==[[Image:berlin_paris_screen_connectors.JPG|right|200px]] IGEP PARIS Expansion supports SEIKO 7” LCD screen. Use J200, J203 and J204 connector to attach screen. See image for more details.<br>  '''Know more'''<br>  IGEP PARIS Expansion integrates LCD backlight driver (TPS61081) and touch screen controller (TSC2046), a 4-wire touch screen controller which supports a low voltage I/O interface from 1.5V to 5.25V.<br><br><br><br> == Serial port ARM=='''Basic''' [[Image:Paris db9.jpg|right|200px]]
===Included (IGEP PARIS Expansion integrates a DB9 RS232 connector. Plug a DB9 cable. <brGST DSP):==='''AACHEDEC -> DEC AACHE (OK)'''
'''Know more''' http://download.wavetlan.com/SVV/Media/HTTP/FAAC-HE-AAC.aac
This peripheral (UART 3) can be used to gst-launch --gst-debug system using kernel traces, getting a remote prompt, etc-level=2 filesrc location=sampleaache. <br> <br> <br>m4a ! TIAuddec1 codecName=aachedec engineName=codecServer ! volume volume=0.25 ! alsasink sync=false
== Ethernet Network cable ==''' Basic ''' [[Image:Paris ethernet.jpg|right|200px]] outofthebox->ok
Plug an '''Ethernet cable''' between IGEP PARIS and your client machine (or any other network device with ethernet connectivity).----
'''MP3DEC -> DEC MP3 (AUDIO ERRORS)'''
''' Know more '''- Followed README file from ISEE - IGEP DSP - GST + DMAI Support Package 3.40.00
IGEP PARIS comes with one 10http:/100BASE-TX Ethernet ports/www.stephaniequinn.com/Music/Canon. mp3
In the following chapters we will use ethernet to access IGEP PARISgst-launch --gst-debug-level=2 filesrc location=Canon.mp3 ! TIAuddec1 codecName=mp3dec engineName=codecServer ! volume volume=0.25 ! alsasink sync=false
== USB devices ==''' Basic Random fatal bit error''' [[Image:Paris usb.jpg|right|200px]]
Connect a USB hub to '''mp3-plugin doesn't resolve the USB type-A connector (USB Host) in IGEP PARIS.error'''
Then plug a USB keyboard and USB mouse to the USB hub. ----
'''G711DEC -> DEC PCM uLAW (speech) (NOT TESTED)'''
''' Know more G711ENC -> ENC PCM uLAW (speech) (NOT TESTED)'''
Only USB 2.0 devices will work in ===Not included (IGEP PARIS, so if you connect any USB mouse 1.0 into the USB host connector without using a USB hub 2.0, it will not work.GST DSP):==='''ACCLCDEC -> DEC AACLE (NOT TESTED)'''
== Battery ==[[Image:Paris battery.jpg|right|200px]] J102 is a 2.5mm pitch, can be used to connect a 3,7V Battery to power the base board.<br><br><br><br><br><br'''AACLDDEC ->DEC AACLD (NOT TESTED)'''
== Connect IGEP PARIS Expansion with IGEP COM MODULE/NEUTRON Board ==[[Image:PARIS+module.JPG|right|200px]]The IGEP PARIS Expansion connects to the IGEP COM MODULE/NEUTRON Board through J1 and J4 connectors. Just take a look on the figure to mount it:<br> <br><br><br><br><br><br'''WMA9 ->DEC WMA9 (COMPILING ISSUES)'''
== Connect IGEP PARIS Expansion with IGEP COM PROTON Board ==[[Image:PARIS+proton.JPG|right|200px]]The IGEP PARIS Expansion connects to the IGEP COM PROTON Board through J1, J4 and J8 connectors. Just take a look on the figure to mount it:<br> <br><br><br><br><br><br'''ACCLCENC ->ENC AACLE (NOT TESTED)'''
== Power up IGEP PARIS Expansion ==[[Image:Paris berlin connector.png|right|200px]]Once you have connected the peripherals '''you can apply powerACCHEENC -> ENC AACHE (NOT TESTED)''' to your IGEP PARIS with 5V DC power supply (J101) with a minimum of 3A current capacity.<br><br><br><br><br><br><br><br>
== Test the Demo software distribution with touch screen=='''AACLDENC -> ENC AACLD (NOT TESTED)'''
''' Basic WMA8 -> ENC WMA8 (NOT TESTED)'''
When IGEP PARIS powers up, the desktop of the preinstalled software will appear on the touch screen.'''Problems adding codecs into igep-gst-dsp'''
You can use your fingers to test the demo applications.== DM3730==
[[Image=== DM3730:Poky-screenshot.png|thumb|500px|center|Screenshot of the Desktop of the pre-installed software]]Decode a MP3 file (OK) (ADDED TO REPOSISTORIES)===
'''under contruction'''
''' Know more ''' All IGEP Processor Boards does not have a pre-installed software in its flash memory which consists of a '''minimal Linux-based distribution''' with a lite X Window System and GNOME Mobile based applications created with '''Poky Platform Builder'''. == Log into IGEP PARIS Expansion via Ethernet interface == {{Message/Information Message|title=|message=In non-Linux operating system, use [http://labs.isee.biz/index.php/IGEP_SDK_Virtual_Machine IGEP SDK Virtual Machine] to connect to IGEP COM MODULE via USB or read article [http://labs.isee.biz/index.php/Using_USB_ethernet_gadget_to_communicate "Using USB ethernet gadget to communicate"]}} In your Host Machine: Open a Terminal session and set the IP of the Ethernet interface in which IGEP is connected (for example eth0): *In the file /etc/network/interfaces, you should add:<pre>iface eth0 inet dhcp iface eth0:0 inet staticaddress 192.168.5.10netmask 255.255.255.0</pre> *Type in a terminal:<pre>sudo ifup eth0:0</pre> *Revise that:<pre>jdoe@ubuntu ~ $ ifconfig...eth0:0 Link encap:Ethernet HWaddr 08:00:27:ad:0c:ad inet addr:192.168.5.10 Bcast:0.0.0.0 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1...</pre>*Connect to IGEP device  jdoe@ubuntu ~ $ ssh root@192.168.5.1 {{Navigation/IGEP Technology Guides/Getting Started/Ending|Next_Step={{#lst:Template:Links|IGEP_PARIS_Community_Guides_2}}}} {{Table/IGEP Technology Devices|Tech_Family={{#lst:Template:Links|IGEP_PARIS_Tech_Family}}|Tech_ID={{#lst:Template:Links|IGEP_PARIS_Tech_ID}}|Name={{#lst:Template:Links|IGEP_PARIS_Name}}|Image={{#lst:Template:Links|IGEP_PARIS_Image}}|ISEE_MainPage={{#lst:Template:Links|IGEP_PARIS_ISEE_MainPage}}|ISEE_Hardware={{#lst:Template:Links|IGEP_PARIS_ISEE_Hardware}}}} [[Category:IGEP Technology Devices Guides]] = Getting started with IGEP BERLIN = {{Table/IGEP Technology Devices|Tech_Family={{#lst:Template:Links|IGEP_BERLIN_Tech_Family}}|Tech_ID={{#lst:Template:Links|IGEP_BERLIN_Tech_ID}}|Name={{#lst:Template:Links|IGEP_BERLIN_Name}}|Image={{#lst:Template:Links|IGEP_BERLIN_Image}}|ISEE_MainPage={{#lst:Template:Links|IGEP_BERLIN_ISEE_MainPage}}|ISEE_Hardware={{#lst:Template:Links|IGEP_BERLIN_ISEE_Hardware}}}}  <br> __TOC__ = Overview =This is the 1/3 chapter of IGEP BERLIN Expansion Tutorial Guide.  In this first chapter, we will learn how to connect some expansion peripherals. = Requirements = In these tutorials we are going to need the following components:  *[http://isee.biz/products/processor-boards/igep-com-proton IGEP COM PROTON] or [http://isee.biz/products/processor-boards/igep-com-module IGEP COM MODULE]*5V DC power supply with a minimum of 3A current capacity.*[http://shop.isee.biz/buy-online/accesories/tft-24-bits-seiko-7.html Seiko 7"] screen if you need a touch screen. *DB9 connector and USB serial converter to follow serial communication tutorial.*Ethernet cable.*A monitor compatible with DVI-D*An USB keyboard and a mouse*4 pin connector for CAN Bus with another IGEP Board with CAN peripheral to follow CAN Bus communication tutorial.*SIM card with an antenna to follow Telit modem tutorial.*Composite video cable, composite video output peripheral (PAL or NTSC) and a screen to follow TVP5151 tutorial.*Li-on battery with 3V3*A PC = Getting started === TFT and Touchscreen ==[[Image:berlin_paris_screen_connectors.JPG|right|200px]] IGEP BERLIN Expansion supports SEIKO 7” LCD screen. Use J200, J203 and J204 connector for SEIKO 7". See image for more details.<br>  '''Know more'''<br>  IGEP BERLIN Expansion integrates LCD backlight driver (TPS61081) and touch screen controller (TSC2046), a 4-wire touch screen controller which supports a low voltage I/O interface from 1.5V to 5.25V.<br><br><br><br> == Serial port =='''Basic''' [[Image:Berlin db9.png|right|200px]]  IGEP BERLIN Expansion integrates a DB9 RS232 connector. Plug a DB9 cable. <br>  '''Know more'''  This peripheral (UART 3) can be used to debug system using kernel traces, getting a remote prompt, etc. <br> <br> <br> == Ethernet Network cable ==''' Basic ''' [[Image:Berlin ethernet.jpg|right|200px]]  Plug an '''Ethernet cable''' between IGEP PARIS and your client machine (or any other network device with ethernet connectivity).  ''' Know more ''' IGEP PARIS comes with one 10/100BASE-TX Ethernet ports.  In the following chapters we will use ethernet to access IGEP PARIS. == USB devices ==''' Basic ''' [[Image:Berlin usbs.png|right|200px]]  Plug an USB keyboard and USB mouse to the USB ports.  ''' Know more ''' Only USB 2.0 devices will work in IGEP PARIS, so if you connect any USB mouse 1.0 into the USB host connector without using a USB hub 2.0, it will not work. == Composite Video Decoder =='''Basic'''  [[Image:Berlin rca.jpg|right|200px]]IGEP BERLIN Expansion integrates two composite video connectors to decode analog input signal. Plug some peripheral with video composite output.<br>  '''Know more'''  Analog input is decoded by TVP5151.<br><br><br><br><br> == GSM/GPRS modem =='''Basic'''  {| align="right" cellspacing="1" cellpadding="1" border="1" width="200"|-| [[Image:Berlin antenna.png|200px]] | [[Image:Berlin simcard.png|right|200px]]|-| GSM-GPRS antenna (highly recommended) | SIM card reader|} IGEPv2 Expansion integrates a GSM/GPRS&nbsp;modem to make phone calls or to send SMS or to write and read data from it, etc.<br>  '''Know more'''  Modem chip Telit GE865 is a small GSM/GPRS Ball-Grid-Array BGA module with next main features:  *Quad-band EGSM 850 / 900 / 1800 / 1900 MHz *Power consumption (typical values) &nbsp;&nbsp;&nbsp; - Power off: ‹ 62 uA<br>&nbsp;&nbsp;&nbsp; - Idle (registered, power saving): 1.6 mA @ DRX=9 <br> <br> <br> == CAN bus == '''Basic'''  [[Image:Berlin can.png|right|200px]]IGEPv2 Expansion integrates a CAN peripheral. Connect any CAN bus device or network to the CAN bus connector (J703).<br>  '''Know moreaccelerated audio decoder element'''  This output is controled by MICROCHIP MCP2515. J703 is a 3.5 mm pitch terminal blocks 4 Positions:  {| cellspacing="1" cellpadding="1" width="350" border="1"|-| Signal Name | Pin #<br> | Description|-| VDD_CAN | J703:1 | Supply Voltage (+5V DC)|-| CANL | J703:2 | CAN Low-Level Voltage I/O|-| GND | J703:3 | Ground|-| CANH | J703:4 | CAN High-Level Voltage I/O|} == DVI monitor ==
''' Basic '''[[Image:Berlin hdmi.png|right|200px]] IGEPv2 has a '''HDMI connector''' with a '''DVI-D interface'''Compiled gst-plugins-ugly using yocto tools
Connect IGEPv2 to a DVI-D compatible monitorrpm -igst-plugins-ugly-0.*.rpm
- rpm -i libmad0-0.*.rpm
''' Know more '''- rpm -i gst-plugins-ugly-mad-0.*.rpm
The Digital Visual Interface (DVI) is a video standard interface designed to provide very high visual quality on digital display devices such as flat panel LCD computer displays and digital projectors. It is partially compatible with the High-Definition Multimedia Interface (HDMI) standard in digital mode (DVIgst-D), and VGA in analog mode (DVI-A)launch filesrc location=sample.mp3 ! mad ! volume volume=0.25 ! alsasink
Note that your monitor should be able to support 1024 x 768 @ 60 Hz, which is the default resolution in the preinstalled software.=== DM3730: Decode a RA or RM audio file (ERRORS)===
gst-launch --gst-debug-level=3 filesrc location= VGA monitor =sample.ra ! rmdemux ! volume volume=[[Image:Berlin vga0.png|right|200px]] '''Basic'''25 ! alsasink
IGEPv2 Expansion integrates a VGA connector, the output VGA signal is equal to HDMI connectorhttp://www. Plug a monitor with VGA&nbsp;inputsuperluminal. com/andalib/ra/listen.ra
'''Know more''' gst-plugins-ugly-rmdemux-0.10.19-r1.armv7a.rpm
This output is controled by ADV7125KSTZ140 Integrated Circuitlibgstsdp-0. 10-0-0.10.36-r3.armv7a.rpm:libgstsdp-0.10-0 libgstsdp-0.10.so.0
<br> <br> <br><br> <br>libgstrtsp-0.10-0-0.10.36-r3.armv7a.rpm:libgstrtsp-0.10-0 libgstrtsp-0.10.so.0
== Battery ==[[Image'''Error:Berlin battery.png|right|200px]] J102 is a 2.5mm pitch, can be used to connect a 3,7V Battery to power the base board.<br><br><br><br><br><br>'''
== Connect IGEP BERLIN Expansion with IGEP COM MODULE/NEUTRON Board ==[[Image0:BERLIN+module00:00.JPG|right|200px]]The IGEP BERLIN Expansion connects to the IGEP COM MODULE/NEUTRON Board through J1 and J4 connectors084839071 1550 0xa137b0 WARN rmdemux rmdemux. Just take a look on the figure below to mount itc:1012:gst_rmdemux_chain:<br> <br><br><br><br><br><brrmdemux0>Bogus looking header, unprintable FOURCC
== Connect IGEP BERLIN Expansion with IGEP COM PROTON Board ==[[Image0:BERLIN+proton00:00.JPG|right|200px]]The IGEP BERLIN Expansion connects to the IGEP COM PROTON Board through J1, J4, J9 and J8 connectors085052695 1550 0xa137b0 WARN rmdemux rmdemux. Just take a look on the figure below to mount itc:1012:gst_rmdemux_chain:<br> <br><br><br><br><br><brrmdemux0>Bogus looking header, unprintable FOURCC
== Power up IGEP BERLIN Expansion ==[[Image0:Paris berlin connector00:00.png|right|200px]]Once you have connected the peripherals '''you can apply power''' to your IGEP BERLIN with 5V DC power supply (J101) with a minimum of 3A current capacity085540976 1550 0xa137b0 WARN rmdemux rmdemux.c:1057:gst_rmdemux_chain:<br><br><br><br><br><br><br><brrmdemux0>Unknown object_id .ra4
== Test the Demo software distribution with touch screen ==0:00:00.085693564 1550 0xa137b0 WARN rmdemux rmdemux.c:1012:gst_rmdemux_chain:<rmdemux0> Bogus looking header, unprintable FOURCC
''' Basic '''0:00:00.085815634 1550 0xa137b0 WARN rmdemux rmdemux.c:1012:gst_rmdemux_chain:<rmdemux0> Bogus looking header, unprintable FOURCC
When IGEP BERLIN powers up, the desktop of the preinstalled software will appear on the touch screen0:00:00.085907187 1550 0xa137b0 WARN rmdemux rmdemux.c:1057:gst_rmdemux_chain:<rmdemux0> Unknown object_id RaTC
You can use your fingers to test the demo applications.=== DM3730: Decode an AAC audio file (OK)===
[[Image:PokyEXTRA_OECONF += "--disable-examples --disable-experimental --disable-sdl --disable-cdaudio --disable-directfb \ --with-plugins=musicbrainz,wavpack,ivorbis,mpegvideoparse,'''faad2''' --disable-vdpau --disable-apexsink \ --screenshot.png|thumb|500px|center|Screenshot of the Desktop of the predisable-installed software]]orc"Install:
''' Know more '''faad2-2.7-r2.armv7a.rpmlibfaad2-2.7-r2.armv7a.rpmgst-plugins-bad-faad-0.10.23-r2.armv7a.rpm
All IGEP Processor Boards have a pre-installed software in its flash memory which consists of a '''minimal Linuxmaybe there are necessary more packages, compare actual gst-based distribution''' with a lite X Window System bad-recipe and GNOME Mobile based applications created with '''Poky Platform Builderadd changes. Necessary add faad2 recipe'''<pre>bitbake faad2 gst-plugins-bad</pre><pre> rpm -i faad2-2.7-r2.armv7a.rpmrpm -i libfaad2-2.7-r2.armv7a.rpmrpm -i gst-plugins-bad-faad-0.10.23-r2.1.armv7a.rpm </pre>
gst-launch --gst-debug-level=3 filesrc location= Log into IGEP BERLIN Expansion via Ethernet interface =sample.aac ! faad ! volume volume=0.10 ! alsasink
{{Message/Information Message|title=|message=In non-Linux operating system, use [http== DM3730://labs.isee.biz/index.php/IGEP_SDK_Virtual_Machine IGEP SDK Virtual Machine] to connect to IGEP COM MODULE via USB or read article [http://labs.isee.biz/index.php/Using_USB_ethernet_gadget_to_communicate "Using USB ethernet gadget to communicate"]}}Decode an WMA audio file (OK)====
In your Host Machine:<pre>bitbake gst-ffmpeg</pre>
Open a Terminal session and set the IP of the Ethernet interface in which IGEP is connected (for example eth0):<pre>gst-launch -v filesrc location=sample.wma ! asfdemux ! decodebin ! audioconvert ! volume volume=0.25 ! alsasink </pre>
*In the === DM3730: Decode an OGG audio file /etc/network/interfaces, you should add:<pre>iface eth0 inet dhcp iface eth0:0 inet staticaddress 192.168.5.10netmask 255.255.255.0</pre> *Type in a terminal:<pre>sudo ifup eth0:0</pre> *Revise that:<pre>jdoe@ubuntu ~ $ ifconfig...eth0:0 Link encap:Ethernet HWaddr 08:00:27:ad:0c:ad inet addr:192.168.5.10 Bcast:0.0.0.0 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1...</pre>*Connect to IGEP device(OK)===
jdoe@ubuntu ~ $ ssh root@192.168.5.1'''Into repositories (base plugins):'''
http://upload.wikimedia.org/wikipedia/en/0/04/Rayman_2_music_sample.ogg
{{Navigation/IGEP Technology Guides/Getting Started/Ending|Next_Stepgst-launch -v filesrc location={{#lst:Template:Links|IGEP_BERLIN_Community_Guides_2}}}}sample.ogg ! oggdemux ! vorbisdec ! audioconvert ! volume volume=0.25 ! alsasink
{{Table/IGEP Technology Devices|Tech_Family={{#lst:Template:Links|IGEP_BERLIN_Tech_Family}}|Tech_ID={{#lst:Template:Links|IGEP_BERLIN_Tech_ID}}|NameBASE0033 CONNECTOR SUMMARY TABLE={{#lst:Template:Links|IGEP_BERLIN_Name}}|Image={{#lst:Template:Links|IGEP_BERLIN_Image}}|ISEE_MainPage={{#lst:Template:Links|IGEP_BERLIN_ISEE_MainPage}}|ISEE_Hardware={{#lst:Template:Links|IGEP_BERLIN_ISEE_Hardware}}}}
[[Category:IGEP Technology Devices Guides]]== Configure a static IP using the same private network range ==
= [IGEP Technology devices features table proposal] ='''under construction'''
{| cellspacing="0" cellpadding="1" border="1" style="text-align: center;"|-|| bgcolor="#cccccc" | IGEP0032 | bgcolor="#cccccc" | IGEP0030| bgcolor="#cccccc" | IGEP0030| bgcolor="#cccccc" | IGEP0020| bgcolor="#cccccc" | IGEP0010|-| '''Product name''' | bgcolor="#cccccc" | '''IGEP COM PROTON''' | bgcolor="#cccccc" | '''IGEP COM MODULE''' | bgcolor="#cccccc" | '''IGEP COM ELECTRON''' | bgcolor="#cccccc" | '''IGEPv2''' | bgcolor="#cccccc" | '''IGEP0010'''|-| | width="200" | [[Image:Igep0032 side.png|145x93px|center|link=Category:IGEP0032]] | width="200" | [[Image:Igep0030.jpg|184x120px|center|link=Category:IGEP0030]] | width="200" | [[Image:Igep0030neutron.png|184x120px|center|link=Category:IGEP0030]] | width="200" | [[Image:Igep0020.jpg|174x116px|center|link=Category:IGEP0020]] | width="200" | [[Image:Igep0010.jpg|181x114px|center|link=Category:IGEP0010]]|-| '''Devices and interfaces''' || || || || || Firmware Yocto uses the following Ethernet network configuration (discontinued productIP addresses)|-| style="text-align: right;" | ARM CPU|| DM3730 1GHz || DM3730 1GHz|| AM3703 1GHz || DM3730 1GHz || -|-| style="text-align: right;" | DSP|| TMS320DM-C64+ 800 Mhz || TMS320DM-C64+ 800 Mhz || - ||TMS320DM-C64+ 800 Mhz || -|-| style="text-align: right;" | RAM Memory|| 512 MBytes / 200 Mhz || 512 MBytes / 200 Mhz || 256 MBytes / 200 Mhz || 512 MBytes / 200 Mhz || -|-| style="text-align: right;" | Flash Memory|| 512 MBytes || 512 MBytes || 512 MBytes || 512 MBytes || -|-| style="text-align: right;" | MicroSD Card Reader|| x 1 || x 1 || x 1 || x 1 || -|-| style="text-align: right;" | USB 2.0 Host || - || - || - || x 1 || -|-| style="text-align: right;" | USB 2.0 OTG || x 1 || x 1 || x 1 || x 1 || -|-| style="text-align: right;" | RS232|| - || - || - || x 1 || -|-| style="text-align: right;" | RS485|| - || - || - || x 1 || -|-| style="text-align: right;" | JTAG|| x 1 || - || - || x 1 || -|-| style="text-align: right;" | Stereo audio In/Out|| - || - || - || x 1 || -|-| style="text-align: right;" | DVI on HDMI|| - || - || - || x 1 || -|-| style="text-align: right;" | Ethernet|| - || - || - || x 1 || -|-| style="text-align: right;" | Wifi|| - || x 1 || - || x 1 || -|-| style="text-align: right;" | Bluetooth|| - || x 1 || - || x 1 || -|-| style="text-align: right;" | EEPROM|| x 1 || - || - || - || -|-| style="text-align: right;" | S-Video|| - || - || - || T.P. || -|-| style="text-align: right;" | Camera Interface|| - || x 1 || - || N.P. || -|-| style="text-align: right;" | Analog to digital converter|| - || - || - ||N.P.|| -|-| style="text-align: right;" | Keyboard matrix|| - || - || - || N.P. || -|-| style="text-align: right;" | LEDs|| x 3 green LEDs || x 2 bicolor LEDs|| x 1 bicolor LED|| x 2 bicolor LEDs|| -|-| style="text-align: right;" | TFT Interface|| - || - || - || x 2 || -|-| style="text-align: right;" | RTC Battery Back Up|| - || - || - || x 2 || -|-| Size||35x51,2mm || 18x68,5mm || 18x68,5mm || 65x95mm || -|-| style="text-align: right;" | '''Expansion connectors'''|| Power and many functionalities from OMAP3 processor || Power and many functionalities from OMAP3 processor || Power and many functionalities from OMAP3 processor || Power 5V and 1.8V, UART, McBSP, McSPI, I2C, GPIO, RS485 with transceiver, Keyboard || -|-| style="text-align: right;" rowspan="2" | '''Main pages'''| style="text-align: center;" | [[Image:Isee logo.png|57x57px|link=http://www.isee.biz/products/processor-boards/igep-com-proton]] | style="text-align: center;" | [[Image:Isee logo.png|57x57px|link=http://www.isee.biz/products/processor-boards/igep-com-module]] | style="text-align: center;" | [[Image:Isee logo.png|57x57px|link=http://www.isee.biz/products/processor-boards/igep-com-electron]] | style="text-align: center;" | [[Image:Isee logo.png|57x57px|link=http://www.isee.biz/products/processor-boards/igepv2-board]] | style="text-align: center;" rowspan="3" | -|-| style="text-align: center;" | [[Image:Igep community logo.png|62x62px|link=Category:IGEP0032]] | style="text-align: center;" | [[Image:Igep community logo.png|62x62px|link=Category:IGEP0030]] | style="text-align: center;" | [[Image:Igep community logo.png|62x62px|link=Category:IGEP0030]]| style="text-align: center;" | [[Image:Igep community logo.png|62x62px|link=Category:IGEP0020]]|-| style="text-align: right;" | '''Getting started guide'''<br> | style="text-align: center;" | [[Image:Documentation.png|33x33px|link=Getting Started with IGEP0032 board]] | style="text-align: center;" | [[Image:Documentation.png|33x33px|link=Getting Started with IGEP0030 board]] | style="text-align: center;" | [[Image:Documentation.png|33x33px|link=Getting Started with IGEP0030 board]]| style="text-align: center;" | [[Image:Documentation.png|33x33px|link=Getting Started with IGEP0020 board]]|-| style="text-align: right;" | '''Hardware manual'''| style="text-align: center;" | [[Image:Hw manual.png|30x42px|link=http://www.isee.biz/component/zoo/item/igep-com-proton-hardware-reference-manual]] | style="text-align: center;" | [[Image:Hw manual.png|30x42px|link=http://www.isee.biz/component/zoo/item/igep-com-module-hardware-reference-manual]] | style="text-align: center;" | [[Image:Hw manual.png|30x42px|link=http://www.isee.biz/component/zoo/item/igep-electron-hardware-reference-manual-copy]] | style="text-align: center;" | [[Image:Hw manual.png|30x42px|link=http://www.isee.biz/component/zoo/item/igepv2-hardware-reference-manual]]| -|}
*eth0 − 192.168.5.1
*eth0:0 − assigned via dhcp.
* OThis Ethernet network configuration is really useful when you work using a Linux operating system like IGEP SDK Virtual Machine. Because you use eth0 device to communicate easily with your board and eth0: Available on board0 device to get Internet acces using dhcp protocol.
* N.P.But some scenarios this network configuration is not useful, for example: Not populated THESE DEVICES and/or CONNECTORS ARE AVAILABLEif you use a non-Linux operating system, BUT NOT POPULATED BY DEFAULTconnect to two IP private range interfaces is not simple. This How-to can be useful to
* T(Make diagram one: IGEP and Linux defualt communication.P.: Test pointsDiagram 2 IGEP and other SO alternative configuration)
= igep.ini parameters =
| Only for base0010<br>=B
|}
 
= How to use GPIOs (update it) =
 
== Overview ==
 
This How-To is meant to be a starting point for people to learn use GPIOs for IGEP v2 devices as quickly and easily as possible. For this how-to i used [http://releases.linaro.org/platform/linaro-m/headless/final/linaro-m-headless-tar-20101108-2.tar.gz Linaro Headless] with [[Linux Kernel 2.6.35.y|Kernel 2.6.35.y]], Ubuntu 10.04 with Linaro Toolchain, IGEP v2 RC5 and [http://downloads.igep.es/labs/gpio-driver.tar.bz2 GPIO driver].
 
There are more ways to use GPIOs in IGEP v2, but this one is very simple.<br>
 
== Feedback and Contributing ==
 
At any point, if you see a mistake you can contribute to this How-To.<br>
 
== Compile GPIO driver source code via Host<br> ==
 
Download [http://downloads.igep.es/labs/gpio-driver.tar.bz2 GPIO driver] and [[Linux Kernel 2.6.35.y|Kernel 2.6.35.y]] source code. Extract files.<br>
 
Edit GPIO driver Makefile's:
 
-In files: $/app/Makefile and $/lib/Makefile, make sure that your CROSS_COMPILE path is correct.
 
-In file: $/modules/Makefile, make sure that your CROSS_COMPILE path is correct and&nbsp;type your Kernel 2.6.35.y path.<br>
 
We will use the ncurses program for set up Kernel configuration, if you don't have this program installed then you must install it with this command:
<pre>sudo apt-get install ncurses-dev
</pre>
-Go to kernel path and type:
<pre>make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- igep00x0_defconfig
</pre>
Exit Linux Kernel Configuration an return to Bash. Type:
<pre>make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- modules_prepare
</pre>
File $/include/generated/autoconf.h was created
 
Finally compile GPIO driver, go to main Makefile path and compile all source code using make command.
 
Send binaries created from Host to Igep v2. <br>
 
== Install binaries via IGEP<br> ==
 
Log with root user to install binaries.
 
=== Install module ===
 
Go to:$/modules and insert user-gpio-drv.ko into linux kernel with the following command:
<pre>insmod user-gpio-drv.ko
</pre>
Check that user-gpio-drv.ko is currently loaded with the following command:
<pre>lsmod</pre>
The result will be similar at that: <br>
<pre>root@localhost:~/gpio-driver/module# lsmod
Module Size Used by
user_gpio_drv 1639 0
omap_wdt 3411 0
spidev 4198 0
iommu 8558 0
rtc_twl 4411 0
rtc_core 11187 1 rtc_twl
twl4030_keypad 2970 0
</pre>
The module is loaded until system halt.
 
=== Install shared library ===
 
Go to:$/lib. libgpio.so is here.
 
If a program is linked with shared libraries, Kernel seek in specific paths when program is executed. Now is necessary link the libgpio.so path to the environment variable LD_LIBRARY_PATH, use the following command:<br>
<pre>export LD_LIBRARY_PATH=/root/gpio-driver/lib/
</pre>
Check that libgpio.so is linked correctly. Go to:$/gpio-driver/app, gpio program is here. Type next command:
<pre>ldd gpio
</pre>
ldd command, print shared library dependencies. The result will be similar at that:
<pre>root@localhost:~/gpio-driver/app# ldd gpio
libgpio.so =&gt; /root/gpio-driver/lib/libgpio.so (0x40197000)
libc.so.6 =&gt; /lib/libc.so.6 (0x401a0000)
/lib/ld-linux.so.3 (0x4008a000)
</pre>
The shared library is linked until system halt. Now you can execute gpio example program.
 
== Testing driver ==
 
To make sure than driver works well, make the next test. I used GPIO_136(sdmmc2_dat4) and GPIO_137(sdmmc2_dat5) because IGEP v2 RC5(without WIFI) don't use them by default: <br>
 
'''NOTE:''' For more information visit this [[Mux configuration|page]] (under construction). <br>
 
=== Configure Mux ===
 
Go to:/sys/kernel/debug/omap_mux, and change this mux configuration:
<pre>echo 0x104&gt;sdmmc2_dat4
echo 0x104&gt;sdmmc2_dat5
</pre>
Use cat command to check it:<br>
<pre>cat sdmmc2_dat4
cat sdmmc2_dat5
</pre>
The result will be similar at that:
<pre>root@localhost:/sys/kernel/debug/omap_mux# cat sdmmc2_dat4
name: sdmmc2_dat4.gpio_136 (0x48002164/0x134 = 0x0104), b ae4, t NA
mode: OMAP_PIN_INPUT | OMAP_MUX_MODE4
signals: sdmmc2_dat4 | sdmmc2_dir_dat0 | NA | sdmmc3_dat0 | gpio_136 | NA | NA | safe_mode
</pre>
and
<pre>root@localhost:/sys/kernel/debug/omap_mux# cat sdmmc2_dat5
name: sdmmc2_dat5.gpio_137 (0x48002166/0x136 = 0x0104), b ah3, t NA
mode: OMAP_PIN_INPUT | OMAP_MUX_MODE4
signals: sdmmc2_dat5 | sdmmc2_dir_dat1 | cam_global_reset | sdmmc3_dat1 | gpio_137 | hsusb3_tll_stp | mm3_rxdp | safe_mode
</pre>
Note: OMAP_PIN_INPUT=Input/Output pin and OMAP_PIN_OUTPUT=Output pin, for Read/Write test you need the first one. GPIO is configured in mode 4.<br>
 
=== Read/Write test ===
 
Link GPIO_136 and GPIO_137 with a wire, these pins are located in J990 connector with numbers 7 and 9. I use the next connector to join them:<br>
 
{| align="center" cellspacing="1" cellpadding="1" border="1" width="200"
|-
| [[Image:Connector used readwrite test.JPG|center|350x230px]]
|
[[Image:All connected readwrite test.JPG|center|350x230px]]
 
|}
 
<br>
 
Now type next code:
<pre>root@localhost:~/gpio-driver/app# ./gpio input 136
root@localhost:~/gpio-driver/app# ./gpio output 137 0
root@localhost:~/gpio-driver/app# ./gpio get 136
0
root@localhost:~/gpio-driver/app# ./gpio output 137 1
root@localhost:~/gpio-driver/app# ./gpio get 136
1
root@localhost:~/gpio-driver/app#
</pre>
The results (CMOS Voltages: 0V-1V8):
 
{| align="center" cellspacing="1" cellpadding="1" border="1" width="200"
|-
| [[Image:GPIO value0 readwrite test.JPG|center|350x230px]]
|
[[Image:GPIO value1 readwrite test.JPG|center|350x230px]]
 
|}
 
<br> The code above shows that driver works properly, GPIO_136 is configured like input and GPIO_137 is configured like output with value 0, when read GPIO_136 the result is 0. To make sure that works well, configure GPIO_137 with value 1, now GPIO_136 reads 1. <br> This driver have more options like IRQ, but is not explained here.
 
[[Category:USB]] [[Category:How_to_forge]] [[Category:GPIO]] [[Category:UART]] [[Category:IGEP_Technology_Devices_Guides]]
Pau
4,199
edits
Retrieved from "http://labs.isee.biz/index.php?title=Special:MobileDiff/7643...10302"