IGEP SMARC AM335x

From IGEP - ISEE Wiki

Jump to: navigation, search

Industrial Processor AM335x Cortex-A8 Module up to 1000 MHz

IGEP SMARC AM335x FRONT.jpg

IGEP SMARC AM335x Module cover an extremely wide performance range. Based on the ARM Cortex-A8 technology, they enable an efficient development of smart devices in an extremely compact, fanless design with balanced processor and graphics performance..

Features

Processor

AM3352 (Standard Setup) / AM3354 / AM3358 / AM3359, by Texas Instruments
ARM Cortex-A8
NEON SIMD Coprocessor
Frequency speed up to 1000 MHz (depending on model)

3D/2D Accelerator

PowerVR SGX GPU, providing graphics acceleration with OpenGL ES1.0, OpenGL ES2.0 and OpenVG support (depending on model)

Memory

RAM: 128 MB up to 512 MB DDR3 (Standard setup 256 MB)
FLASH: 128 MB up to 512 MB (Standard setup 128 MB)

Ethernet

10/100 Mbps Ethernet PHY interface
10/100/1000 Mbps Ethernet PHY interface (optional)

USB

1 x USB 2.0 Host
1 x USB 2.0 OTG

Display

1 x Digital Video/TFT interface (16-bits)
1 x DVI-D/HDMI (16-bits) (optional)

Wireless

WiFi IEEE 802.11 b/g/n (Access Point: Yes)
Bluetooth v4.0 (BLE)

Antenna

1 x Internal WiFi/Bluetooth antenna
1 x U.FL connector for external antenna (Optional)

Additional Interfaces
(Other combinations available, see Hardware Manual for more information)

2 x I2C
2 x CAN
1 x SPI
5 x GPIOs
1 x McASP/I2S (Digital Serial Audio Interface)
1 x PWM
8 x ADC
3 x UART
2 x MMC
JTAG Interface

SW Support

Linux

Power Supply

Power Supply: From 4,5 V to 5,5 V
Digital I/O voltage: 1,8 V

Power Consumption

Typical 1,2 W (depending on software)
Maximum 3,5 W (depending on software)

Thermal

Industrial temperature: -40 ºC to +80 ºC

Optional:Commercial temperature: 0 ºC to +60 ºC

Form Factor

82,00 mm x 50,00 mm

Humidity

93% relative Humidity at 40 ºC, non-condensing (according to IEC 60068-2-78)

MTBF

> 100000 hours

Versions

Model Description
IGEP0034 - RA Internal use, AM3354 processor (2016)
IGEP0034 - RB AM3352 processor (2018)

Documentation

Tutorials

If you are new with concepts from below we recommend you complete  the tutorials in order !

  1. IGEP SMARC AM335x Boot Pin-out
  2. Prepare a ready to boot firmware.
  3. How to prepare a ready to boot firmware.
  4. U-Boot Bootloader.
  5. Linux Kernel.
  6. IGEP Firmware set-up.
  7. Boot from MicroSD Card.
  8. Boot from NAND/eMMC flash.
  9. Update Installed IGEP Firmware.

Firmware

Official

Custom Software

Guides

Getting started with IGEP SMARC AM335x

Ubuntu / Debian

Yocto